Logo

ASTM B883-10e1

Historical Revision

Standard Specification for Metal Injection Molded (MIM) Materials

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


...

1.1 This specification covers ferrous metal injection molded materials fabricated by mixing elemental or pre-alloyed metal powders with binders, injecting into a mold, debinding, and sintering, with or without subsequent heat treatment.

1.2 This specification covers the following injection molded materials.

1.2.1 Compositions:

1.2.1.1 MIM-2200, low-alloy steel

1.2.1.2 MIM-2700, low-alloy steel

1.2.1.3 MIM-4605, low-alloy steel

1.2.1.4 MIM-4140, low-alloy steel

1.2.1.5 MIM-316L, austenitic stainless steel

1.2.1.6 MIM-17-4 PH, precipitation hardening stainless steel

1.2.1.7 MIM-420, ferritic stainless steel

1.2.1.8 MIM-430L, ferritic stainless steel

1.3 Chemical composition limits are specified in Table 1.

TABLE 1 Chemical Composition Requirements For Metal Injection Molded Materials

Material
Designation

 

Fe

Ni

Cr

Co

Mo

C

Cu

Si

Mn

Nb + Ta

V

Other

MIM-2200

Min.

Bal.

1.5

-

-

-

-

-

-

-

-

-

-

 

Max.

Bal.

2.5

-

-

0.5

0.1

-

1.0

-

-

-

1.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIM-2700

Min.

Bal.

6.5

-

-

-

-

-

-

-

-

-

-

 

Max.

Bal.

8.5

-

-

0.5

0.1

-

1.0

-

-

-

1.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIM-4605

Min.

Bal.

1.5

-

-

0.2

0.4

-

-

-

-

-

-

 

Max.

Bal.

2.5

-

-

0.5

0.6

-

1.0

-

-

-

1.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIM-4140

Min.

Bal.

-

0.8

-

0.2

0.3

-

-

-

-

-

-

 

Max.

Bal.

-

1.2

-

0.3

0.5

-

0.6

1.0

-

-

1.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIM-316L

Min.

Bal.

10

16

-

2

-

-

-

-

-

-

-

 

Max.

Bal.

14

18

-

3

0.03

-

1.0

2.0

-

-

1.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIM-420

Min.

Bal.

-

12

-

-

0.15

-

-

-

-

-

-

 

Max.

Bal.

-

14

-

-

0.4

-

1.0

1.0

-

-

1.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIM-430L

Min.

Bal.

-

16

-

-

-

-

-

-

-

-

-

 

Max.

Bal.

-

18

-

-

0.05

-

1.0

1.0

-

-

1.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIM-17-4PH

Min.

Bal.

3

15.5

-

-

-

3

-

-

0.15

-

-

 

Max.

Bal.

5

17.5

-

-

0.07

5

1.0

1.0

0.45

-

1.0



This specification covers ferrous metal injection molded (MIM) materials fabricated by mixing elemental or pre-alloyed metal powders with binders, injecting into a mold, debinding, and sintering with or without subsequent heat treatment. These materials are: low-alloy steel produced from admixtures of iron powder and other alloying elements such as nickel and molybdenum (MIM-2200 and MIM-2700); low-alloy steel produced from admixtures of iron powder and other alloying elements such as nickel, molybdenum, and carbon (MIM-4605); austenitic stainless steel produced from pre-alloyed powder or an admixture of powders (MIM-316L); precipitation hardening stainless steel produced from pre-alloyed powder or an admixture of powders (MIM-17-4 PH); and ferritic stainless steel produced from pre-alloyed powder or an admixture of powders (MIM-430L). Chemical analysis shall be performed for the elements copper, chromium, molybdenum, and nickel. The materials shall be subjected to tensile test and unnotched Charpy impact energy test.


SDO ASTM: ASTM International
Document Number B883
Publication Date Dec. 1, 2010
Language en - English
Page Count 6
Revision Level 10e1
Supercedes
Committee B09.11
Publish Date Document Id Type View
Feb. 1, 2024 B0883-24 Revision
April 1, 2019 B0883-19 Revision
Sept. 1, 2017 B0883-17 Revision
Oct. 1, 2015 B0883-15 Revision
Dec. 1, 2010 B0883-10E01 Revision
Dec. 1, 2010 B0883-10 Revision
March 1, 2005 B0883-05 Revision
Oct. 10, 1997 B0883-97 Revision