| ASTM |
B649 |
Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925,<brk/> UNS N08031, UNS N08034, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire |
|
| ASTM |
B546 |
Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-Si Alloy, Ni-Cr-Fe-Al Alloy, Ni-Cr-Fe Alloy, and Ni-Cr-Fe-Si Alloy Pipe |
|
| ASTM |
B625 |
Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloy, Ni-Fe-Cr-Si Alloy, <brk />Cr-Ni-Fe-N Low-Carbon Alloy, Fe-Ni-Cr-Mo-Cu-N Alloy, and <brk/>Ni-Fe-Cr-Mo-N Alloy Plate, Sheet, and Strip |
|
| ASTM |
B575 |
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip |
|
| BSI |
BS 1449-1.8 |
Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip based on formability |
|
| BSI |
BS 1449-1.14 |
Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes |
|
| ASTM |
B425 |
Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and <brk/>UNS N06845) Rod and Bar |
|
| BSI |
BS 1449-1 |
Steel plate, sheet and strip. Specification for carbon and carbon-manganese plate, sheet and strip |
|
| BSI |
BS 1449-1.1 |
Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. General specification |
|
| BSI |
BS HR 251 |
Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder) |
|
| SAE |
SAE AMS6436 |
Steel Sheet, Strip, and Plate, Low-Alloy, Heat Resistant, 0.65si 1.25cr 0.50mo 0.85v (0.25 0.30c), Annealed |
|
| SAE |
SAE AMS6385 |
Steel Sheet, Strip, and Plate, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C)_x000D_
_x000D_
|
|
| ASTM |
B574 |
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar |
|
| ASTM |
B932 |
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip (Withdrawn 2015) |
|
| SAE |
SAE AMS4027 |
Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6 Sheet, -T651 Plate), Solution and Precipitation Heat Treated |
|
| SAE |
SAE AMS4026 |
Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T4 Sheet, -T451 Plate), Solution Heat Treated and Naturally Aged |
|
| SAE |
SAE AMS5593 |
Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe, Solution Heat Treated_x000D_
|
|
| BSI |
BS 2HR 204 |
Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
|
| ASTM |
A786/A786M |
Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
|
| BSI |
BS EN 10355 |
Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
|
| SAE |
SAE AMS4023 |
Aluminum Alloy Sheet and Plate, Alclad, 1.0Mg - 0.60Si - 0.28Cu - 0.28Cr (Alclad 6061; -T6 Sheet, -T651 Plate |
|
| BSI |
BS 2HC 101 |
Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5). Specification for precipitation hardening chromium-nickel-copper- molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5) |
|
| BSI |
BS 2HR 207 |
Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) |
|
| SAE |
SAE AMS5536 |
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate
47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (Alloy X or HX) Solution Heat
Treated
|
|
| ASTM |
A1011/A1011M |
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
|