Logo

ASTM B514-05

Current Revision

Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers nickel-iron-chromium alloys in the form of welded, cold-worked, and annealed pipe for general corrosive service and heat-resisting applications. These products are furnished in three alloys: UNS N08120, UNS N08800, and UNS N08810.* Alloy UNS N08800 is employed normally in service temperatures up to and including 1100F (593C). Alloys UNS N08120 and UNS N08810 are employed normally in service temperatures above 1100F where resistance to creep and rupture is required, and are annealed to develop controlled grain size for optimum properties in this temperature range.

1.2 This specification covers outside diameter and nominal wall pipe shown in ANSI B36.19. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of the specification.

1.3 The values stated in inch-pound units are to be regarded as the standard.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.


This specification covers nickel-iron-chromium alloys in the form of welded, cold-worked, and annealed pipe for general corrosive service and heat resisting applications. These products are furnished three alloys: UNS N08120, UNS N0880, and UNS N08810. The materials shall conform to the required chemical composition for nickel, chromium, iorn, manganese, carbon, copper, silicon, sulfur, aluminum, titanium, columbium, molybdenum, phosphorus, tungsten, cobalt, and nitrogen. The materials shall conform to the requred mechaniical properties such as tensile strength, yield strength, and elongation. A transverse sample representing the full wall thickness of annealed alloys UNS N08120 and N08810 shall conform to the average grain size. Pipe shall be capable of withstanding, without cracking, flattening under a load applied gradually. Each piece of each lot shall be subjected to hydrostatic test, pneumatic test, eddy current test, ultrasonic test, leak test, electric test, and transverse guided bend test.


SDO ASTM: ASTM International
Document Number B514
Publication Date Nov. 1, 2005
Language en - English
Page Count 3
Revision Level 05
Supercedes
Committee B02.07
Publish Date Document Id Type View
Nov. 1, 2005 B0514-05 Revision
Oct. 10, 1995 B0514-95 Revision
April 1, 2019 B0514-05R19 Reaffirmation
Oct. 1, 2014 B0514-05R14 Reaffirmation
Oct. 1, 2009 B0514-05R09 Reaffirmation
Nov. 1, 2005 B0514-95R02E01 Reaffirmation