Logo

ASTM B453/B453M-05

Historical Revision

Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from Copper Alloys UNS Nos. C33500, C34000, C34500, C35000, C35300, and C35600. These alloys have nominal composition given in .

1.1.1 This product is suitable for applications requiring extensive machining before such cold-forming operations as swaging, flaring, severe knurling, or thread rolling.

Note 1

Refer to for additional applications information.

1.1.2 Typically, product made to this specification is furnished as straight lengths. Sizes 1/2 in. [12 mm] and under may be furnished as wire in coils or on reels when requested.

1.2 The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.Note 2 Refer to Specifications B 16/B 16M and B 140/B 140M for copper-zinc-lead (leaded-brass) rod and bar for screw machine applications.


This specification establishes the requirements for rods, bars, wires, and shapes of copper-zinc-lead alloys (leaded-brass) with Copper Alloy UNS Nos. C33500, C34000, C34500, C35000, C35300, and C35600. The products to which this specification applies is suitable for applications requiring extensive machining before such cold-forming processes as swaging, flaring, severe knurling, or thread rolling. Products shall be produced in tempers O60 (soft annealed), H01 (1/4 hard), and H02 (1/2 hard). Products shall be tested to examine their conformance to dimensional (diameter, shape, length, and straightness), mechanical (tensile and yield strength, Rockwell hardness, and elongation), and chemical composition requirements.


SDO ASTM: ASTM International
Document Number B453
Publication Date Oct. 1, 2005
Language en - English
Page Count 5
Revision Level 05
Supercedes
Committee B05.02
Publish Date Document Id Type View
April 1, 2019 B0453_B0453M-19 Revision
Oct. 1, 2011 B0453_B0453M-11E01 Revision
Oct. 1, 2011 B0453_B0453M-11 Revision
Oct. 1, 2005 B0453_B0453M-08 Revision
Oct. 1, 2005 B0453_B0453M-05 Revision
April 10, 2001 B0453_B0453M-01 Revision
Oct. 1, 2017 B0453_B0453M-11R17 Reaffirmation