Logo

ASTM B333-03(2008)

Historical Reaffirmation

Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers plate, sheet, and strip of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)* as shown in Table 1, for use in general corrosive service.

1.2 The following products are covered under this specification:

1.2.1 Sheet and StripHot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.

1.2.2 PlateHot or cold rolled, solution annealed, and descaled.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

TABLE 1 Chemical Requirements

ElementComposition Limits, %
Alloy
N10001
Alloy
N10665
Alloy
N10675
Alloy
N10629
Alloy
N10624
NickelremainderAremainderA65.0 minremainderABal
Molybdenum26.030.026.030.027.032.0 26.030.021.0-25.0
Iron 4.06.0 2.0 max 1.03.0 1.06.0 5.0-8.0
Chromium 1.0 max 1.0 max 1.03.0 0.51.5 6.0-10.0
Carbon, max 0.05 0.02 0.01 0.01 0.01
Silicon, max 1.0 0.10 0.10 0.05 0.10
Cobalt, max 2.5 1.00 3.0 2.5 1.0
Manganese,
max
1.0 1.0 3.0 1.5 1.0
Phosphorus,
max
0.04 0.04 0.030 0.04 0.025
Sulfur, max 0.03 0.03 0.010 0.01 0.01
Vanadium 0.20.4 ... 0.20 max ... ...
Nickel plus
Molybdenum
... ...94.098.0 ...
Aluminum ... ... 0.50 max 0.10.5 0.5
Columbium
(Nb), max
... ... 0.20 ...
Copper, max ... ... 0.20 0.5 0.5
Tantalum,
max
... ... 0.20 ...
Titanium,
max
... ... 0.20 ...
Tungsten,
max
... ... 3.0 ...
Zirconium,
max
... ... 0.10 ...
Magnesium,
max
... ... ... ... ...

A See Specification B 906.


This specification covers plate, sheet, and strip of nickel-molybdenum alloys covering UNS N10001, N10665, N10675, N10629, and N10624 for use in general corrosive service. Product analysis shall be performed on the alloy and shall conform to the chemical composition requirement in nickel, molybdenum, iron, chromium, carbon, silicon, cobalt, manganese, phosphorus, sulfur, vanadium, nickel, molybdenum, aluminum, columbium, copper, tantalum, titanium, tungsten, zirconium, and magnesium. Sheet and strip shall undergo hot or cold rolling, solution annealing, and descaling unless solution annealed in atmosphere. Plates shall undergo hot or cold rolling, solution annealing, and descaling. The material shall conform to the required tensile properties such as tensile strength, yield strength, elongation, and Rockwell hardness. Sheet and strip shall conform to the specified grain size requirement


SDO ASTM: ASTM International
Document Number B333
Publication Date Nov. 1, 2008
Language en - English
Page Count 3
Revision Level 03(2008)
Supercedes
Committee B02.07
Publish Date Document Id Type View
June 10, 2003 B0333-03 Revision
Jan. 1, 1997 B0333-98 Revision
Nov. 1, 2018 B0333-03R18 Reaffirmation
Feb. 1, 2013 B0333-03R13 Reaffirmation
Nov. 1, 2008 B0333-03R08 Reaffirmation