Logo

ASTM B330-07

Historical Revision

Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This test method uses air permeability to determine an envelope-specific surface area and its associated average equivalent spherical diameter (from 0.5 to 50 m) of metal powders and related compounds. The powders may be analyzed in their "as-supplied" (shipped, received, or processed) condition or after they have been de-agglomerated or milled by a laboratory procedure ("lab milled") such as that specified in Practice B 859. The values obtained are not intended to be absolute but are generally useful on a relative basis for control purposes.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


This test method provides a procedure for determining the envelope-specific surface area of powders, from which is calculated an average particle diameter, assuming the particles are monosize, smooth surface, nonporous, spherical particles. For this reason, values obtained by this test method will be defined as a Fisher Number. The degree of correlation between the results of this test method and the quality of powders in use will vary with each particular application and has not been fully determined.

This test method is generally applicable to all metal powders and related compounds, including carbides, nitrides, and oxides, for particles having diameters between 0.5 and 50 μm. It should not be used for powders composed of particles whose shape is too far from equiaxed, that is, flakes or fibers. In these cases, it is permissible to use the test method described only by agreement between the parties concerned. This test method shall not be used for mixtures of different powders nor for powders containing binders or lubricants. When the powder contains agglomerates, the measured surface area may be affected by the degree of agglomeration. Methods of de-agglomeration such as that referenced in 1.1 may be used if agreed upon between the parties concerned.

When an average particle size of powders is determined using the Fisher sub-sieve sizer, it should be clearly kept in mind that this average size is derived from the determination of the specific surface area of the powder using a relationship that is true only for powders of uniform size and spherical shape.

SDO ASTM: ASTM International
Document Number B330
Publication Date March 15, 2007
Language en - English
Page Count 5
Revision Level 07
Supercedes
Committee B09.03
Publish Date Document Id Type View
Oct. 1, 2020 B0330-20 Revision
Oct. 1, 2015 B0330-15 Revision
Nov. 1, 2012 B0330-12 Revision
March 15, 2007 B0330-07 Revision
Oct. 1, 2005 B0330-05 Revision
Oct. 10, 2002 B0330-02 Revision
Oct. 10, 2000 B0330-00 Revision
Oct. 1, 2024 B0330-20R24E01 Reaffirmation