Logo

ASTM B236-07

Current Revision

Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers Aluminum 1350 bar for electric conductors in the tempers shown in .

1.2 Aluminum and temper designations are in accordance with ANSI H35.1/H35.1(M). The equivalent Unified Numbering System designation is A91350 in accordance with Practice E 527. Note 1 - For Alloy 6101 bus conductors, refer to Specification B 317/B 317M.

Note 2

Prior to 1975, Aluminum 1350 was designated as EC aluminum.

1.3 A complete metric companion to Specification B 236 has been developed-B 236M; therefore, no metric equivalents appear in this specification.

1.4 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.


This specification covers aluminum 1350 bar for electric conductors in the tempers. The products covered by this specification shall be produced by extruding or rolling, at the option of the producer, provided that the production method results in material that meets all requirements of this specification. Samples for chemical analysis shall be taken from the specimen by drilling, sawing, milling, turning, or clipping a representative piece or pieces to obtain a prepared sample. One tension test per specimen shall be taken from a random bar representing a specified weight of bar, or fraction thereof, of the same temper, thickness, and width in the shipment. The tempers shall be capable of being bent flatwise at room temperature, through a given angle around a pin or mandrel having a radius equal to the thickness of the specimen, without cracking or evidence of slivers or other imperfections. Unless otherwise specified, bar shall be furnished with square corners. The bars shall be supplied with as-sawed square ends. The edges of sawed plate bus bar shall be as sawed. The material shall be packaged to provide adequate protection during normal handling and transportation and each package shall contain only one size and temper of material unless otherwise agreed.


SDO ASTM: ASTM International
Document Number B236
Publication Date June 1, 2007
Language en - English
Page Count 6
Revision Level 07
Supercedes
Committee B07.03
Publish Date Document Id Type View
June 1, 2007 B0236-07 Revision
May 10, 2000 B0236-00 Revision
Oct. 1, 2015 B0236-07R15 Reaffirmation
May 1, 2006 B0236-00R06 Reaffirmation