Logo

ASTM B164-03(2014)

Historical Reaffirmation

Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification2 covers nickel-copper alloys UNS N04400 and N044053 in the form of hot-worked and cold-worked rod and bar in the conditions shown in Table 1 and cold-worked wire in the conditions shown in Table 2.

(A) See 12.2.
(B) Not applicable to diameters or cross sections under 3/32 in. (2.4 mm).
(C) For sections under 1/2 in. (12.7 mm), the elongation shall be 10 % min.
(D) For hot-worked flats 5/16 in. (7.9 mm) and under in thickness the elongation shall be 20 % min.
(E) Forging quality is furnished to chemical requirements and surface inspection only. No tensile properties are required.
(A) Properties are not applicable to wire after straightening and cutting.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.


This specification covers nickel-copper alloys UNS N04400 and N04405 in the form of hot-worked and cold-worked rod, bar, and wire. The material shall conform to the chemical composition limits specified by the reference material. The materials for rod, bar, or wire shall conform to the mechanical properties specified by the reference material. One test per lot shall be performed for chemical analysis, tension test, hardness test, and wrapping test.


SDO ASTM: ASTM International
Document Number B164
Publication Date Oct. 1, 2014
Language en - English
Page Count 9
Revision Level 03(2014)
Supercedes
Committee B02.07
Publish Date Document Id Type View
June 10, 2003 B0164-03 Revision
Aug. 10, 1998 B0164-98 Revision
April 1, 2019 B0164-03R19 Reaffirmation
Oct. 1, 2014 B0164-03R14 Reaffirmation
March 1, 2008 B0164-03R08 Reaffirmation