Logo

ASTM B161-05e1

Current Revision

Standard Specification for Nickel Seamless Pipe and Tube

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers nickel (UNS N02200)* and low-carbon nickel (UNS N02201)* in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table X1.1.

1.1.1 Hot-worked material is available. Properties are to be agreed upon between the manufacturer and purchaser.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations.

TABLE 1 Mechanical Properties

Condition and SizeTensile Strength, min, psi (MPa) Yield Strength (0.2 % offset), min, psi (MPa)Elongation in 2 in. or 50 mm (or
4 D), min, %
Nickel (UNS N02200)Low-Carbon Nickel
(UNS N02201)
Nickel (UNS N02200)Low-Carbon Nickel
(UNS N02201)
Nickel (UNS
N02200)
Low-Carbon
Nickel (UNS
N02201)
Annealed:
5 in. (127 mm) and under
outside diameter
55 000 (380)50 000 (345)15 000 (105) 12 000 (80)3535
Over 5 in. (127 mm) in
outside diameter
55 000 (380)50 000 (345)12 000 (80) 10 000 (70)4040
Stress-Relieved:
All sizes65 000 (450) 60 000 (415) 40 000 (275) 30 000 (205)15 15

This specification covers the standard requirements for nickel (UNS N02200) and low-carbon nickel (UNS N02201) in the form of cold-worked seamless pipe and tube. The material shall conform to the specified chemical composition limits for nickel, copper, iron, manganese, carbon, silicon, and sulfur which shall be determined by chemical analysis. Tension test shall be performed; wherein, the tensile properties for the material specified as small-diameter and light-wall tube shall be in conformity with the tensile strength, yield strength, and elongation requirements. Each pipe or tube shall also be subjected to nondestructive electric test or hydrostatic test in accordance with a referenced ASTM document to determine the allowable fiber stress for the annealed and stress-relieved materials.


SDO ASTM: ASTM International
Document Number B161
Publication Date Nov. 1, 2005
Language en - English
Page Count 4
Revision Level 05e1
Supercedes
Committee B02.07
Publish Date Document Id Type View
Nov. 1, 2005 B0161-05E01 Revision
Nov. 1, 2005 B0161-05 Revision
June 10, 2003 B0161-03 Revision
May 10, 2000 B0161-00 Revision
Not Available B0161-93 Revision
April 1, 2019 B0161-05R19 Reaffirmation
Oct. 1, 2014 B0161-05R14 Reaffirmation
Oct. 1, 2009 B0161-05R09 Reaffirmation