Logo

ASTM B122/B122M-11

Historical Revision

Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification establishes the requirements for copper-nickel-tin alloy, copper-nickel-zinc alloy (nickel silver), and copper-nickel alloy plate, sheet, strip, and rolled bar. The following alloys are covered:

Previously
Copper AlloyUsed Nominal Composition,
UNS No. Designation%

Copper

Nickel

Zinc

Tin
Chro-
mium
C70600...9010 .........
C70620...8610.........
C7100068020 .........
C7150057030 .........
C71520...6531.........
C72200...8515 ......0.5
C72500...89 9 ...2...
C7350017218 10......
C7400097010 20......
C7450036510 24......
C7520026518 17......
C7620085912 29......
C7700045518 27......

Note 1—Plates of copper-nickel alloy Copper Alloy UNS Nos. C70600, C70620, C71500, C71520, and C72200 for use as tube plates in surface condensers and heat exchangers are covered by Specification B171/B171M.

1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.2.1 When the product is ordered in inch-pound units, the inch-pound units are to be regarded as the standard except grain size is always specified in millimetres.

1.2.2 When the product is ordered in SI units, the SI units are to be regarded as the standard.


This specification establishes the requirements for copper-nickel-tin, copper-nickel-zinc, and copper-nickel alloy plates, sheets, strips, and rolled bars made from UNS C70600, C70620, C71000, C71500, C71520, C72200, C72500, C73500, C74000, C74500, C75200, C76200, or C77000 alloy. Each product should be manufactured by hot or cold working, and annealed if required, to produce a uniform wrought structure that meets the specified temper properties. This specification also contains information on the standard tempers for and tensile strengths of hot-rolled, cold-rolled, and annealed tempers. In case of disagreements, the chemical composition is determined following appropriate methods listed here. Grain size is the standard requirement for all products in the annealed tempers.


SDO ASTM: ASTM International
Document Number B122
Publication Date Oct. 1, 2011
Language en - English
Page Count 7
Revision Level 11
Supercedes
Committee B05.01
Publish Date Document Id Type View
Oct. 1, 2020 B0122_B0122M-20 Revision
April 1, 2016 B0122_B0122M-16 Revision
Oct. 1, 2011 B0122_B0122M-11 Revision
April 1, 2008 B0122_B0122M-08 Revision
Feb. 1, 2006 B0122_B0122M-06 Revision
May 10, 2001 B0122_B0122M-95 Revision
May 10, 2001 B0122_B0122M-01 Revision