Logo

ASTM A960/A960M-10

Historical Revision

Standard Specification for Common Requirements for Wrought Steel Piping Fittings

$83.00

$83.00

$149.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers a group of common requirements that shall apply to wrought steel piping fittings covered in any of the following individual product specifications or any other ASTM specification that invokes this specification or portions thereof:

Title of SpecificationASTM
Designation
Specification for Piping Fittings of Wrought
Carbon Steel and Alloy Steel for Moderate and
Elevated Temperatures
A234/A234M
Specification for Wrought Austenitic Stainless
Steel Piping Fittings
A403/A403M
Specification for Piping Fittings of Wrought Carbon
Steel and Alloy Steel for Low-Temperature Service
A420/A420M
Specification for Butt-Welding, Wrought-Carbon
Steel, Piping Fittings with Improved Notch Toughness
A758/A758M
Specification for As-Welded Wrought Austenitic
Stainless Steel Fittings for General Corrosive
Service at Low and Moderate Temperatures
A774/A774M
Specification for Wrought Ferritic, Ferritic/Austenitic,
and Martensitic Stainless Steel Piping Fittings
A815/A815M
Specification for Heat-Treated Carbon Steel
Fittings for Low-Temperature and Corrosive Service
A858/A858M
Specification for Wrought High-Strength
Low-Alloy Steel Butt-Welded Fittings
A860/A860M

1.2 In case of conflict between a requirement of the individual product specification and a requirement of this general requirement specification, the requirements of the individual product specification shall prevail over those of this specification.

1.3 By mutual agreement between the purchaser and the supplier, additional requirements may be specified (See 4.1.8). The acceptance of any such additional requirements shall be dependent on negotiations with the supplier and must be included in the order as agreed upon by the purchaser and supplier.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text and the tables, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the specification. The inch-pound units shall apply unless the M designation [SI] of the product specification is specified in the order.


This specification covers the common requirements that shall apply to wrought steel piping fittings. The material shall consist of forgings, bars, plates, and seamless or welded tubular products. Ferritic steels shall be fully killed. Hollow cylindrically shaped parts up to and including NPS 4 may be machined from bar or seamless tubular material. Elbows, return bends, tees, and header tees shall not be machined directly from bar stock. The following procedures shall be done for heat treatment: full annealing, solution annealing, isothermal annealing, normalizing, tempering and post-weld heat treatment, stress relieving, and quench and temper. Chemical analysis, heat analysis, and product analysis shall also be done. The chemical requirements shall conform to the required compositions of carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, molybdenum, vanadium, columbium, titanium, aluminum, lead, and copper. The following tests shall be done for the mechanical requirements: tension, hardness, impact, and hydrostatic tests.


SDO ASTM: ASTM International
Document Number A960
Publication Date Nov. 1, 2010
Language en - English
Page Count 9
Revision Level 10
Supercedes
Committee A01.22
Publish Date Document Id Type View
Aug. 15, 2024 A0960_A0960M-24A Revision
May 1, 2024 A0960_A0960M-24 Revision
May 1, 2023 A0960_A0960M-23 Revision
March 1, 2020 A0960_A0960M-20 Revision
Nov. 1, 2019 A0960_A0960M-19A Revision
March 1, 2019 A0960_A0960M-19 Revision
Dec. 1, 2016 A0960_A0960M-16A Revision
June 1, 2016 A0960_A0960M-16 Revision
Nov. 1, 2015 A0960_A0960M-15 Revision
Nov. 1, 2014 A0960_A0960M-14A Revision
May 1, 2014 A0960_A0960M-14 Revision
May 1, 2013 A0960_A0960M-13 Revision
Nov. 1, 2010 A0960_A0960M-10 Revision
May 1, 2008 A0960_A0960M-08A Revision
May 1, 2008 A0960_A0960M-08 Revision
Feb. 1, 2007 A0960_A0960M-07 Revision
March 1, 2006 A0960_A0960M-06 Revision
May 1, 2004 A0960_A0960M-04A Revision
March 1, 2004 A0960_A0960M-04 Revision