Logo

ASTM A955/A955M-04ae1

Historical Revision

Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers deformed and plain stainless steel bars for concrete reinforcement used in applications requiring resistance to corrosion or controlled magnetic permeability. The standard sizes and dimensions of deformed bars and their numerical designation shall be those listed in Table 1. The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

1.1.1 Supplementary requirement (S1) of an optional nature is provided. It shall apply only when specified by the purchaser. In order to obtain a controlled magnetic permeability product, steel conforming to Supplementary Requirement S1 should be ordered.

1.2 The chemical composition of the stainless steel alloy shall be selected for suitability to the application involved by agreement between the manufacturer and the purchaser. This is an important consideration in achieving the desired corrosion resistance and/or controlled magnetic permeability.

Note 1—The alloys shown in Table 2 have found the most use in North America. These and other stainless steel alloys specified in A 276 or other specifications are available for consideration in product selection. Consult with the steel manufacturer for stainless steel alloy availability.

1.3 Bars are generally of three minimum yield levels, namely, 40 000 [300 MPa], 60 000 [420 MPa], and 75 000 psi [520 MPa], designated as Grade 40 [300], Grade 60 [420], and Grade 75 [520], respectively.

1.4 Plain rounds in sizes up to and including 2 in. [50.8 mm] in diameter, when specified for dowels, spirals, structural ties, and supports, shall be furnished under this specification in Grade 40 [300], Grade 60 [420], and Grade 75 [520], respectively. Bending properties, when required, shall be by agreement between the manufacturer and purchaser. Requirements providing for deformations and marking shall not be applicable to plain bars.

1.5 Weldability of most stainless steel compositions is generally good, however, pre-weld or post-weld procedures, or both, are necessary. Where material is to be welded, a welding procedure suitable for the chemical composition and intended use or service shall be used. Retesting of physical properties should be considered following welding procedures depending upon the steel composition and welding operation involved.

Note 2—It is recommended that the user consult the manufacturer for information available from the Nickel Development Institute (NIDI) (Toronto, Canada).

1.6 This specification is applicable for orders in either inch-pound units (as Specification A 955) or in SI units (as Specification A 955M).

1.7 The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.


SDO ASTM: ASTM International
Document Number A955
Publication Date May 1, 2004
Language en - English
Page Count 6
Revision Level 04ae1
Supercedes
Committee A01.05
Publish Date Document Id Type View
May 1, 2020 A0955_A0955M-20C Revision
April 1, 2020 A0955_A0955M-20B Revision
March 1, 2020 A0955_A0955M-20A Revision
Jan. 1, 2020 A0955_A0955M-20 Revision
May 15, 2019 A0955_A0955M-19 Revision
Nov. 15, 2018 A0955_A0955M-18B Revision
Nov. 1, 2018 A0955_A0955M-18A Revision
Jan. 1, 2018 A0955_A0955M-18 Revision
Sept. 1, 2017 A0955_A0955M-17A Revision
March 15, 2017 A0955_A0955M-17 Revision
Sept. 15, 2016 A0955_A0955M-16A Revision
Jan. 15, 2016 A0955_A0955M-16 Revision
March 1, 2015 A0955_A0955M-15 Revision
March 1, 2014 A0955_A0955M-14 Revision
March 1, 2012 A0955_A0955M-12E01 Revision
March 1, 2012 A0955_A0955M-12 Revision
April 1, 2011 A0955_A0955M-11E01 Revision
April 1, 2011 A0955_A0955M-11 Revision
Oct. 1, 2010 A0955_A0955M-10A Revision
June 15, 2010 A0955_A0955M-10 Revision
Nov. 15, 2009 A0955_A0955M-09B Revision
Oct. 1, 2009 A0955_A0955M-09A Revision
May 1, 2009 A0955_A0955M-09 Revision
July 15, 2007 A0955_A0955M-07A Revision
March 1, 2007 A0955_A0955M-07 Revision
May 1, 2006 A0955_A0955M-06A Revision
March 1, 2006 A0955_A0955M-06 Revision
July 1, 2005 A0955_A0955M-05A Revision
April 1, 2005 A0955_A0955M-05 Revision
May 1, 2004 A0955_A0955M-04AE01 Revision
May 1, 2004 A0955_A0955M-04A Revision
March 1, 2004 A0955_A0955M-04 Revision
Oct. 1, 2003 A0955_A0955M-03B Revision
June 10, 2003 A0955_A0955M-03A Revision
April 10, 2003 A0955_A0955M-03 Revision
Nov. 10, 2002 A0955_A0955M-02 Revision
April 10, 2001 A0955_A0955M-96 Revision
April 10, 2001 A0955_A0955M-01 Revision