Logo

ASTM A924/A924M-10a

Historical Revision

Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

$91.00

$91.00

$163.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers the general requirements that, unless otherwise specified in the product specification, apply to steel sheet in coils and cut lengths, metallic-coated on continuous lines by the hot-dip process. The product is intended for applications requiring corrosion resistance. The product specifications contain requirements for specific strength levels, heat resistance, paintability, or formability, or a combination thereof.

1.2 Subject to individual product specification provisions, steel sheet is available as Commercial Steel (CS) Types A, B, and C, Forming Steel (FS), Drawing Steel (DS), Deep Drawing Steel (DDS), Extra Deep Drawing Steel (EDDS), High Temperature Steel (HTS), Structural Steel (SS), and High Strength Low Alloy Steel (HSLAS). Steel sheet is produced with the following metallic coatings. Specific information on each of the following is contained in the individual product specification:


This specification covers the general requirements for steel sheet in coils and cut length, metallic-coated on continuous lines by the hot-dip process. This material is intended for applications requiring corrosion resistance. Hot-dip metallic coatings are available in six different types: zinc and zinc-iron alloy, lead-tin alloy, aluminum, aluminum-zinc alloy, zinc-aluminum alloy, and zinc-aluminum-magnesium alloy. Heat analysis shall be made to determine the percentage of carbon, manganese, phosphorus, sulfur, and other elements specified. Product analysis and coating analysis shall also be done. Mechanical properties shall be determined by tension tests. The following are tests for coating properties: coating weight test and coating bend test. There are two methods that shall be used for coating weight test: weigh-strip-weigh method and X-ray fluorescence method.


SDO ASTM: ASTM International
Document Number A924
Publication Date Nov. 1, 2010
Language en - English
Page Count 12
Revision Level 10a
Supercedes
Committee A05.11
Publish Date Document Id Type View
Nov. 1, 2022 A0924_A0924M-22A Revision
April 1, 2022 A0924_A0924M-22 Revision
Sept. 1, 2020 A0924_A0924M-20 Revision
Sept. 1, 2019 A0924_A0924M-19 Revision
Nov. 1, 2018 A0924_A0924M-18 Revision
Sept. 1, 2017 A0924_A0924M-17A Revision
May 1, 2017 A0924_A0924M-17 Revision
June 1, 2016 A0924_A0924M-16AE01 Revision
June 1, 2016 A0924_A0924M-16A Revision
May 1, 2016 A0924_A0924M-16 Revision
Oct. 1, 2014 A0924_A0924M-14E01 Revision
Oct. 1, 2014 A0924_A0924M-14 Revision
April 1, 2013 A0924_A0924M-13 Revision
Nov. 1, 2010 A0924_A0924M-10A Revision
June 1, 2010 A0924_A0924M-10 Revision
Dec. 1, 2009 A0924_A0924M-09A Revision
May 1, 2009 A0924_A0924M-09 Revision
Nov. 1, 2008 A0924_A0924M-08A Revision
June 1, 2008 A0924_A0924M-08 Revision
Jan. 1, 2007 A0924_A0924M-07 Revision
June 15, 2006 A0924_A0924M-06 Revision
May 1, 2004 A0924_A0924M-04 Revision
April 10, 1999 A0924_A0924M-99 Revision