Logo

ASTM A788/A788M-05c

Historical Revision

Standard Specification for Steel Forgings, General Requirements

$91.00

$91.00

$163.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers a group of common requirements that, unless otherwise specified in the individual product specification, shall apply to steel forgings under any of the following specifications issued by ASTM:

1.2 In case of conflict in requirements, the requirements of the individual product specifications shall prevail over those of this specification.

1.3 The purchaser may specify additional requirements (see ) that do not negate any of the provisions of either this specification or of the individual product specifications. The acceptance of any such additional requirements shall be dependent on negotiations with the supplier and must be included in the order.

1.4 If, by agreement, forgings are to be supplied in a partially completed condition, that is, all of the provisions of the product specification have not been filled, then the material marking (see Section ) and certification (see Section ) shall reflect the extent to which the product specification requirements have been met.

1.5 As noted in the Certification Section (), the number and year date of this specification, as well as that of the product specification, are required to be included in the product certification.

1.6 When the SI version of a product specification is required by the purchase order, Specification A 788/A 788M shall be used.

1.7 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


SDO ASTM: ASTM International
Document Number A788
Publication Date Oct. 1, 2005
Language en - English
Page Count 12
Revision Level 05c
Supercedes
Committee A01.06
Publish Date Document Id Type View
Oct. 15, 2024 A0788_A0788M-24A Revision
Aug. 15, 2024 A0788_A0788M-24 Revision
Sept. 1, 2023 A0788_A0788M-23 Revision
Sept. 1, 2022 A0788_A0788M-22A Revision
March 1, 2022 A0788_A0788M-22 Revision
Nov. 15, 2019 A0788_A0788M-19A Revision
May 1, 2019 A0788_A0788M-19 Revision
Nov. 1, 2018 A0788_A0788M-18B Revision
Sept. 1, 2018 A0788_A0788M-18A Revision
March 1, 2018 A0788_A0788M-18 Revision
Nov. 1, 2017 A0788_A0788M-17A Revision
May 1, 2017 A0788_A0788M-17 Revision
Dec. 1, 2016 A0788_A0788M-16A Revision
Sept. 1, 2016 A0788_A0788M-16 Revision
May 1, 2015 A0788_A0788M-15 Revision
Oct. 1, 2014 A0788_A0788M-14A Revision
May 15, 2014 A0788_A0788M-14 Revision
Nov. 1, 2013 A0788_A0788M-13 Revision
Oct. 1, 2011 A0788_A0788M-11 Revision
Nov. 15, 2010 A0788_A0788M-10 Revision
Nov. 1, 2008 A0788_A0788M-08A Revision
May 1, 2008 A0788_A0788M-08 Revision
Sept. 1, 2006 A0788_A0788M-06 Revision
Oct. 1, 2005 A0788_A0788M-05C Revision