Logo

ASTM A781/A781M-18c

Historical Revision

Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

$91.00

$91.00

$163.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers a group of requirements that are mandatory requirements of the following steel casting specifications issued by ASTM. If the product specification specifies different requirements, the product specification shall prevail.

ASTM
Designation


Title of Specification

A27/A27M

Steel Castings, Carbon, for General Application

A128/A128M

Steel Castings, Austenitic Manganese

A148/A148M

Steel Castings, High Strength, for Structural Purposes

A297/A297M

Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

A447/A447M

Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

A494/A494M

Castings, Nickel and Nickel Alloy

A560/A560M

Castings, Chromium-Nickel Alloy

A743/A743M

Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

A744/A744M

Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

A747/A747M

Steel Castings, Stainless, Precipitation Hardening

A890/A890M

Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

A915/A915M

Steel Castings, Carbon and Alloy, Chemical Requirements Similar to Standard Wrought Grades

A958/A958M

Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similiar to Standard Wrought Grades

A1002

Castings, Nickel-Aluminum Ordered Alloy

1.2 This specification also covers a group of supplementary requirements that may be applied to the above specifications as indicated therein. These are provided for use when additional testing or inspection is desired and apply only when specified individually by the purchaser in the order.

1.3 The requirements of the individual material specification and this general specification shall prevail in the sequence named.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


This specification covers a group of common requirements that, unless covered by the individual product specification in another ASTM document, applies to steel and alloy castings for use in general industrial applications. Materials shall be produced by open-hearth or electric furnace process with or without separate refining, such as argon-oxygen-decarburization (AOD), and then consequently heat treated in the working zone. Castings shall receive heat and product analysis to evaluate their conformance to chemical composition requirements. Mechanical requirements shall also be assessed. The surfaces of castings shall be free of adhering sand, scale, cracks, hot tears, and other surface discontinuities. Repair welding may be performed as required.


SDO ASTM: ASTM International
Document Number A781
Publication Date Sept. 1, 2018
Language en - English
Page Count 12
Revision Level 18c
Supercedes
Committee A01.18
Publish Date Document Id Type View
May 1, 2021 A0781_A0781M-21 Revision
Nov. 1, 2020 A0781_A0781M-20A Revision
July 1, 2020 A0781_A0781M-20 Revision
Sept. 1, 2018 A0781_A0781M-18C Revision
June 1, 2018 A0781_A0781M-18B Revision
May 15, 2018 A0781_A0781M-18A Revision
Jan. 1, 2018 A0781_A0781M-18 Revision
May 1, 2017 A0781_A0781M-17 Revision
Dec. 1, 2016 A0781_A0781M-16 Revision
Oct. 1, 2014 A0781_A0781M-14B Revision
May 1, 2014 A0781_A0781M-14A Revision
March 1, 2014 A0781_A0781M-14 Revision
Oct. 1, 2013 A0781_A0781M-13A Revision
May 1, 2013 A0781_A0781M-13 Revision
Nov. 1, 2012 A0781_A0781M-12B Revision
March 1, 2012 A0781_A0781M-12A Revision
Jan. 1, 2012 A0781_A0781M-12 Revision
April 1, 2011 A0781_A0781M-11 Revision
Nov. 1, 2008 A0781_A0781M-08 Revision
June 15, 2006 A0781_A0781M-06 Revision
July 1, 2005 A0781_A0781M-05A Revision
May 1, 2005 A0781_A0781M-05 Revision
May 1, 2004 A0781_A0781M-04A Revision
March 1, 2004 A0781_A0781M-04 Revision
May 10, 2003 A0781_A0781M-03A Revision
April 10, 2003 A0781_A0781M-03 Revision
Sept. 10, 2002 A0781_A0781M-02 Revision
Dec. 10, 2001 A0781_A0781M-01A Revision
Dec. 10, 2001 A0781_A0781M-01 Revision
Dec. 10, 2001 A0781_A0781M-00 Revision