Logo

ASTM A765/A765M-01

Historical Revision

Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers heat-treated carbon steel and alloy steel forgings with mandatory toughness requirements. These forgings are intended for pressure vessels, feedwater heaters, and similar uses.

1.2 These forgings include tube sheets, covers, channel barrels, integral forged channels, rings, nozzles, flanges, and similar parts.

1.3 All grades are considered weldable under proper conditions.

1.4 The maximum thickness of forgings produced to this specification is limited only by the capacity of the selected grade to respond to any heat treatment specified and to meet the specified mechanical tests, including impact tests at the specified temperature.

1.5 Material supplied to this specification shall conform to the requirements of Specification A 788, which outlines additional ordering information, manufacturing requirements, testing and retesting methods and procedures, marking, certification, product analysis variations, and additional supplementary requirements.

1.6 If the requirements of this specification are in conflict with the requirements of Specification A 788, the requirements of this specification shall prevail.

1.7 The values stated in either inch-pound units or SI [metric] units are to be regarded separately as the standard; within the text and tables, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.8 Unless the order specifies the applicable "M" specification designation, the material shall be furnished to the inch-pound units.


SDO ASTM: ASTM International
Document Number A765
Publication Date Oct. 10, 2001
Language en - English
Page Count 4
Revision Level 01
Supercedes
Committee A01.06
Publish Date Document Id Type View
Aug. 15, 2024 A0765_A0765M-24 Revision
Sept. 1, 2007 A0765_A0765M-07 Revision
July 1, 2004 A0765_A0765M-04 Revision
Oct. 10, 2001 A0765_A0765M-98A Revision
Oct. 10, 2001 A0765_A0765M-01 Revision
Sept. 1, 2022 A0765_A0765M-07R22 Reaffirmation
March 15, 2017 A0765_A0765M-07R17 Reaffirmation
May 1, 2012 A0765_A0765M-07R12 Reaffirmation