Logo

ASTM A744/A744M-10e1

Historical Revision

Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers iron-chromium-nickel alloy, stainless steel castings intended for particularly severe corrosive applications.

1.2 This specification requires postweld heat-treatment of all weld repairs affecting surfaces intended to be wetted by the corrosive medium. For applications for which postweld heat-treatment is not considered mandatory for retention of acceptable corrosion resistance, refer to Specification A743/A743M.

Note 1—For general corrosion-resistant alloy castings, reference should be made to Specification A743/A743M. For general heat-resistant alloy castings, reference should be made to Specification A297/A297M. For nickel-base alloy castings, refer to Specification A494/A494M.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3.1 Within the text, the SI units are shown in brackets.

1.3.2 Inch-pound units are applicable for material ordered to Specification A744 and SI units for material ordered to Specification A744M.


This specification covers standard requirements for iron-chromium-nickel alloy, stainless steel castings intended for particularly severe corrosive applications. Alloys shall be melted by the electric furnace process with or without refining such as argon-oxygen-decarburization. Castings shall be heat treated and shall conform to the required heat treatment conditions. The materials shall conform with the prescribed chemical requirements for carbon, manganese, silicon, phosphorus, sulfur, chromium, nickel, molybdenum, columbium, copper, selenium, tungsten, vanadium, iron, and nitrogen.


SDO ASTM: ASTM International
Document Number A744
Publication Date May 1, 2010
Language en - English
Page Count 6
Revision Level 10e1
Supercedes
Committee A01.18
Publish Date Document Id Type View
Nov. 1, 2021 A0744_A0744M-21A Revision
March 1, 2021 A0744_A0744M-21 Revision
Nov. 1, 2020 A0744_A0744M-20A Revision
Sept. 1, 2020 A0744_A0744M-20 Revision
May 15, 2013 A0744_A0744M-13 Revision
May 1, 2010 A0744_A0744M-10E01 Revision
May 1, 2010 A0744_A0744M-10 Revision
March 1, 2006 A0744_A0744M-06 Revision
Sept. 10, 2000 A0744_A0744M-98 Revision
Sept. 10, 2000 A0744_A0744M-00E01 Revision
Sept. 10, 2000 A0744_A0744M-00 Revision
Oct. 1, 2004 A0744_A0744M-00R04 Reaffirmation