Logo

ASTM A711-92(1996)e1

Historical Reaffirmation

Standard Specification for Steel Forging Stock

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers cast carbon and alloy steel ingots and strand castings, semi-wrought ingots and strand castings and rolled or forged blooms, billets, and slabs for forging.

1.2 Blooms, billets, and slabs are semi-finished steel products, hot rolled or forged to approximate cross-sectional dimensions. Blooms and billets may be square, round, octagonal, or rectangular in section; slabs are rectangular. Although no invariable rule prevails between the terms blooms and billets, and they are frequently used interchangeably, the following size distinctions are in general use.

1.2.1 Blooms—Cross-sectional area greater than 36 in.2 (232 cm2 ).

1.2.2 Billets—Maximum cross-sectional area 36 in.2 (232 cm2).

1.2.3 Slabs—Minimum thickness, 11/2 in. (38.0 mm); width, more than twice the thickness; and generally a cross-sectional area of not less than 16 in. 2 (103 cm2).

1.2.4 Ingots either top or bottom poured or secondary remelted are covered.

1.2.5 Strand castings with or without additional reduction are covered.

1.3 Supplementary requirements (S1 to S19) of an optional nature are provided. They shall apply only when specified by the purchaser.

1.4 The values stated in inch-pound units are to be regarded as the standard.


SDO ASTM: ASTM International
Document Number A711
Publication Date July 15, 1992
Language en - English
Page Count 4
Revision Level 92(1996)e1
Supercedes
Committee A01.06
Publish Date Document Id Type View
March 1, 2004 A0711-04 Revision
June 10, 2003 A0711-03 Revision
July 15, 1992 A0711-92R01 Reaffirmation
July 15, 1992 A0711-92R96E01 Reaffirmation