Logo

ASTM A710/A710M-01

Historical Revision

Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers low-carbon age-hardening nickel - copper - chromium - molybdenum - columbium alloy steel plates for general applications.

1.2 One grade with three different conditions is provided as follows:

Grade and ClassCondition
Grade A, Class 1 as-rolled and precipitation heat treated
Grade A, Class 2normalized and precipitation heat treated
Grade A, Class 3 quenched and precipitation heat treated

1.3 Grade A provides minimum yield strength levels ranging from 50 to 85 ksi [345 to 585 MPa], depending on thickness and condition.

1.4 Grade A, Class 1, plates are limited to a maximum thickness of 3/4 in. [20 mm]. The maximum thickness of Grade A, Classes 2 and 3, is limited only by the capacity of the composition to meet the specified mechanical property requirements; however, current practice normally limits the maximum thickness to 8 in. [200 mm].

1.5 Mandatory notch toughness requirements are specified for Grade A, Class 1.

1.6 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.

1.7 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.


SDO ASTM: ASTM International
Document Number A710
Publication Date Sept. 10, 2001
Language en - English
Page Count 3
Revision Level 01
Supercedes
Committee A01.02
Publish Date Document Id Type View
Nov. 1, 2019 A0710_A0710M-19 Revision
Sept. 10, 2002 A0710_A0710M-02 Revision
Sept. 10, 2001 A0710_A0710M-01 Revision
Sept. 10, 2001 A0710_A0710M-00 Revision
May 15, 2013 A0710_A0710M-02R13 Reaffirmation
March 1, 2007 A0710_A0710M-02R07 Reaffirmation