Logo

ASTM A678/A678M-05

Historical Revision

Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates (Withdrawn 2010)

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers quenched-and-tempered carbon steel and high-strength low-alloy steel plates of structural quality for welded, riveted, or bolted construction.

1.2 If the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be used.

1.3 Plates under this specification are available in four grades as follows:

Varies with thickness. See .

GradeYieldStrength,min, ksi[MPa]Tensile Strength,ksi [MPa] MaximumThickness, in. [mm]
A 50 [345]70-90 [485-620]11/2 [40]
B 60 [415]80-100 [550-690]21/2 [65]
C 2 [50]
D 75 [515]90-110 [620-760]3 [75]

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other.


This specification covers quenched-and-tempered carbon steel and high-strength low-alloy steel plates of structural quality for welded, riveted, or bolted construction. The plates shall undergo heat treatment by heating to a temperature that produces an austenitic structure. Heat and product analyses shall be performed on the material and shall conform to the required amount of chemical composition in carbon, manganese, phosphorus, sulfur, silicon, vanadium, columbium, nitrogen, and copper. The plates shall withstand tension test and applicable grade shall conform to the specified mechanical properties such as yield strength, tensile strength, and elongation.


SDO ASTM: ASTM International
Document Number A678
Publication Date Sept. 1, 2005
Language en - English
Page Count 3
Revision Level 05
Supercedes
Committee A01.02
Publish Date Document Id Type View
Oct. 1, 2009 A0678_A0678M-05R09 Revision
Sept. 1, 2005 A0678_A0678M-05 Revision
Sept. 10, 2000 A0678_A0678M-00A Revision