Logo

ASTM A635/A635M-01

Historical Revision

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers hot-rolled, heavy-thickness, carbon commercial steel, drawing steel, structural steel, high-strength low-alloy, and high-strength low-alloy with improved formability sheet and strip. Structural steel may be ordered when the coils are intended for conversion to plate steels. It is included for that purpose only.

1.2 In case of any conflict in requirements, the requirements of the individual material specification shall prevail over those of this general specification.

1.3 lists permissible variations in dimensions and mass (see Note 1) in SI [metric] units. The values listed are not exact conversions of the values listed in the inch-pound tables, but instead are rounded or rationalized values. Conformance to Annex A1 is mandatory when the "M" specification is used.

Note 1—The term weight is used when inch-pound units are the standard. However, under SI, the preferred term is mass.

1.4 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.

1.5 This specification and the applicable material specifications are expressed in both inch-pound units and SI units. However, unless the order specifies the applicable "M" specification designation (SI units), the material shall be furnished to inch-pound units.


SDO ASTM: ASTM International
Document Number A635
Publication Date March 10, 2002
Language en - English
Page Count 10
Revision Level 01
Supercedes
Committee A01.19
Publish Date Document Id Type View
Sept. 1, 2022 A0635_A0635M-22 Revision
Nov. 1, 2015 A0635_A0635M-15 Revision
Oct. 1, 2014 A0635_A0635M-14 Revision
Oct. 1, 2013 A0635_A0635M-13 Revision
Nov. 1, 2009 A0635_A0635M-09B Revision
Oct. 1, 2009 A0635_A0635M-09A Revision
May 1, 2009 A0635_A0635M-09 Revision
Nov. 1, 2008 A0635_A0635M-08 Revision
Sept. 1, 2007 A0635_A0635M-07 Revision
May 1, 2006 A0635_A0635M-06A Revision
March 1, 2006 A0635_A0635M-06 Revision
May 1, 2005 A0635_A0635M-05 Revision
March 1, 2004 A0635_A0635M-04E01 Revision
March 1, 2004 A0635_A0635M-04 Revision
March 10, 2002 A0635_A0635M-02 Revision
March 10, 2002 A0635_A0635M-01 Revision
March 10, 2002 A0635_A0635M-00 Revision