Loading...
1.1 This specification covers iron-chromium-nickel, high-alloy tubes made by the centrifugal casting process intended for use under pressure at high temperatures.
1.2 The grades of high alloys detailed in Table 1 are intended for applications requiring strength and resistance to corrosion and scaling at high temperatures.
1.3 Optional Supplementary Requirements S1 to S11 are provided; these call for additional tests to be made if desired.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of each other. Combining values from the two systems may result in nonconformance with the specification.
TABLE 1 Chemical Requirements
| Grade | Composition, % | |||||||
|---|---|---|---|---|---|---|---|---|
| Carbon | Manganese | Silicon | Chromium | Nickel | Phosphorus | Sulfur | Molybdenum | |
| HC30 | 0.25–0.35 | 0.5–1.0 | 0.50–2.00 | 26–30 | 4.0 max | 0.04 max | 0.04 max | 0.50 max |
| HD50 | 0.45–0.55 | 1.50 max | 0.50–2.00 | 26–30 | 4–7 | 0.04 max | 0.04 max | 0.50 max |
| HE35 | 0.30–0.40 | 1.50 max | 0.50–2.00 | 26–30 | 8–11 | 0.04 max | 0.04 max | 0.50 max |
| HF30 | 0.25–0.35 | 1.50 max | 0.50–2.00 | 19–23 | 9–12 | 0.04 max | 0.04 max | 0.50 max |
| HH30 | 0.25–0.35 | 1.50 max | 0.50–2.00 | 24–28 | 11–14 | 0.04 max | 0.04 max | 0.50 max |
| HH33A | 0.28–0.38 | 1.50 max | 0.50–2.00 | 24–26 | 12–14 | 0.04 max | 0.04 max | 0.50 max |
| HI35 | 0.30–0.40 | 1.50 max | 0.50–2.00 | 26–30 | 14–18 | 0.04 max | 0.04 max | 0.50 max |
| HK30 | 0.25–0.35 | 1.50 max | 0.50–2.00 | 23–27 | 19–22 | 0.04 max | 0.04 max | 0.50 max |
| HK40 | 0.35–0.45 | 1.50 max | 0.50–2.00 | 23–27 | 19–22 | 0.04 max | 0.04 max | 0.50 max |
| HL30 | 0.25–0.35 | 1.50 max | 0.50–2.00 | 28–32 | 18–22 | 0.04 max | 0.04 max | 0.50 max |
| HL40 | 0.35–0.45 | 1.50 max | 0.50–2.00 | 28–32 | 18–22 | 0.04 max | 0.04 max | 0.50 max |
| HN40 | 0.35–0.45 | 1.50 max | 0.50–2.00 | 19–23 | 23–27 | 0.04 max | 0.04 max | 0.50 max |
| HT50 | 0.40–0.60 | 1.50 max | 0.50–2.00 | 15–19 | 33–37 | 0.04 max | 0.04 max | 0.50 max |
| HU50 | 0.40–0.60 | 1.50 max | 0.50–2.00 | 17–21 | 37–41 | 0.04 max | 0.04 max | 0.50 max |
| HW50 | 0.40–0.60 | 1.50 max | 0.50–2.00 | 10–14 | 58–62 | 0.04 max | 0.04 max | 0.50 max |
| HX50 | 0.40–0.60 | 1.50 max | 0.50–2.00 | 15–19 | 64–68 | 0.04 max | 0.04 max | 0.50 max |
A Manufacturing control should ensure that this composition contain a minimal amount of ferrite. See Supplementary Requirement S5.
This specification covers the standard for iron-chromium-nickel, high-alloy tubes made by the centrifugal casting process intended for use under pressure at high temperatures. The tubing shall be supplied in the as cast condition or as cast with machining on the outside or inside surfaces. The material shall conform to the required chemical composition in carbon, manganese, silicon, chromium, nickel, phosphorus, sulfur, and molybdenum. Tension test shall be performed in the tubing at elevated temperature and shall conform to the required values in tensile strength and elongation. Tubing shall meet several tests such as; pressure test, flattening test, and mechanical test.
| SDO | ASTM: ASTM International |
| Document Number | A608 |
| Publication Date | March 1, 2012 |
| Language | en - English |
| Page Count | 6 |
| Revision Level | 06(2012) |
| Supercedes | |
| Committee | A01.18 |
We're glad to see you again! Please enter your email and password to continue
Need an account?
Register for an account to join our community! Gain access to exclusive content, participate in discussions, and stay updated on the latest news.
Have an account?
Forgot your password? No worries! Please enter your email to reset your password. If your email exists in our system, you will receive a password reset link.
Have an account?
We've sent an email to reset your password if an account with that email exists. Please check your inbox and follow the instructions in the email. If you don't see the email, please check your spam folder.
We have sent a verification email to you. Please check your inbox and follow the instructions in the email to verify your account. If you don't see the email, please check your spam folder.