Logo

ASTM A572/A572M-03a

Historical Revision

Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

$73.00

$73.00

$131.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers five grades of high-strength low-alloy structural steel shapes, plates, sheet piling, and bars. Grades 42 [290], 50 [345], and 55 [380] are intended for riveted, bolted, or welded structures. Grades 60 [415] and 65 [450] are intended for riveted or bolted construction of bridges, or for riveted, bolted, or welded construction in other applications.

1.2 For applications, such as welded bridge construction, where notch toughness is important, notch toughness requirements are to be negotiated between the purchaser and the producer.

1.3 The use of columbium, vanadium, titanium, nitrogen, or combinations thereof, within the limitations noted in Section 5, is required; the selection of type (1, 2, 3, 4, or 5) is at the option of the producer, unless otherwise specified by the purchaser. (See Supplementary Requirement S90.)

1.4 The maximum thicknesses available in the grades and products covered by this specification are shown in Table 1.

1.5 When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A 6/A 6M for information on weldability.

1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other, without combining values in any way.

1.7 The text of this specification contains notes or footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements.

1.8 For structural products cut from coiled product, the additional requirements, including additional testing requirements and the reporting of additional tests, of A 6/A 6M apply.


SDO ASTM: ASTM International
Document Number A572
Publication Date May 10, 2003
Language en - English
Page Count 4
Revision Level 03a
Supercedes
Committee A01.02
Publish Date Document Id Type View
May 15, 2021 A0572_A0572M-21E01 Revision
May 15, 2021 A0572_A0572M-21 Revision
May 1, 2018 A0572_A0572M-18 Revision
March 1, 2015 A0572_A0572M-15 Revision
Nov. 1, 2013 A0572_A0572M-13A Revision
Oct. 1, 2013 A0572_A0572M-13 Revision
Nov. 1, 2012 A0572_A0572M-12A Revision
May 1, 2012 A0572_A0572M-12 Revision
March 1, 2007 A0572_A0572M-07 Revision
March 1, 2006 A0572_A0572M-06 Revision
April 1, 2004 A0572_A0572M-04 Revision
May 10, 2003 A0572_A0572M-03AE01 Revision
May 10, 2003 A0572_A0572M-03A Revision
April 10, 2003 A0572_A0572M-03 Revision
Dec. 10, 2002 A0572_A0572M-02 Revision
Sept. 10, 2001 A0572_A0572M-01 Revision
Sept. 10, 2001 A0572_A0572M-00A Revision