Logo

ASTM A568/A568M-15

Historical Revision

Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

$0.00

$0.00

$0.00

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 This specification covers the general requirements for steel sheet in coils and cut lengths. It applies to the following specifications that describe carbon steel, structural steel, and high-strength, low-alloy steel (HSLA) furnished as hot-rolled sheet and cold-rolled sheet: Specifications A414/A414M, A424, A606, A659/A659M, A794, A1008/A1008M, A1011/A1011M, and A1039/A1039M.

1.2 This specification is not applicable to hot-rolled heavy-thickness carbon sheet coils (Specification A635/A635M).

1.3 In case of any conflict in requirements, the requirements of the individual material specification shall prevail over those of this general specification.

1.4 For the purposes of determining conformance with this and the appropriate product specification referenced in 1.1, values shall be rounded to the nearest unit in the right hand place of figures used in expressing the limiting values in accordance with the rounding method of Practice E29.

1.5 Annex A1 lists permissible variations in dimensions and mass (see Note 1) in SI [metric] units. The values listed are not exact conversions of the values listed in the inch-pound tables, but instead are rounded or rationalized values. Conformance to Annex A1 is mandatory when the “M” specification is used.

Note 1: The term weight is used when inch-pound units are the standard. However, under SI the preferred term is mass.

1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.7 This specification and the applicable material specifications are expressed in both inch-pound units and SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.


This specification covers the general requirements for carbon, structural, and high-strength, low alloy steel sheets in coils and cut lengths. The steel sheets shall be manufactured by hot-rolling, cold-rolling or temper rolling. Cold-rolled sheets shall undergo annealing after being cold reduced to thickness. Products shall undergo cast or heat analysis, product, check, or verification analysis, and sampling. Product analyses shall be performed wherein specimens shall conform to required chemical composition of carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum, vanadium, columbium, niobium, titanium, aluminum, and nitrogen. Mechanical properties of the materials shall conform to the following properties: tensile strength, yield strength, and bending strength. Thickness, length, width and flatness tolerances and allowances for cold-rolled and hot-rolled sheets are indicated. Steel may be produced as ingot-cast or strand-cast.


SDO ASTM: ASTM International
Document Number A568
Publication Date Nov. 1, 2015
Language en - English
Page Count 31
Revision Level 15
Supercedes
Committee A01.19
Publish Date Document Id Type View
Nov. 1, 2019 A0568_A0568M-19A Revision
Sept. 1, 2019 A0568_A0568M-19 Revision
Nov. 1, 2017 A0568_A0568M-17A Revision
Sept. 1, 2017 A0568_A0568M-17 Revision
Nov. 1, 2015 A0568_A0568M-15 Revision
Oct. 1, 2014 A0568_A0568M-14 Revision
Oct. 1, 2013 A0568_A0568M-13AE01 Revision
Oct. 1, 2013 A0568_A0568M-13A Revision
May 1, 2013 A0568_A0568M-13 Revision
Oct. 1, 2011 A0568_A0568M-11B Revision
May 1, 2011 A0568_A0568M-11A Revision
April 1, 2011 A0568_A0568M-11 Revision
Feb. 9, 2011 A0568_A0568M-09AE01 Revision
Nov. 1, 2009 A0568_A0568M-09A Revision
May 1, 2009 A0568_A0568M-09 Revision
Nov. 1, 2007 A0568_A0568M-07A Revision
Sept. 1, 2007 A0568_A0568M-07 Revision
May 15, 2006 A0568_A0568M-06A Revision
March 1, 2006 A0568_A0568M-06 Revision
Dec. 1, 2005 A0568_A0568M-05A Revision
May 1, 2005 A0568_A0568M-05 Revision
Dec. 1, 2004 A0568_A0568M-04A Revision
Oct. 1, 2004 A0568_A0568M-04 Revision
March 10, 2003 A0568_A0568M-03 Revision
March 10, 2002 A0568_A0568M-02 Revision
March 10, 2002 A0568_A0568M-01 Revision
March 10, 2002 A0568_A0568M-00B Revision