Logo

ASTM A541/A541M-05(2015)

Historical Reaffirmation

Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

$83.00

$83.00

$149.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification2 covers requirements for quenched and tempered carbon and alloy steel forgings for pressure vessel components.

1.2 All grades are considered weldable under proper conditions. Welding technique is of fundamental importance, and it is presupposed that welding procedure and inspection will be in accordance with approved methods for the grade of material used.

Note 1: Grades 1 and 1A have different chemistries but the same mechanical requirements.

Note 2: Designations have been changed as follows:

Current

Formerly

 

 

Grade 1

Class 1

Grade 1A

Class 1A

Grade 1C

Class 4

Grade 2 Class 1

Class 2

Grade 2 Class 2

Class 2A

Grade 3 Class 1

Class 3

Grade 3 Class 2

Class 3A

Grade 4N Class 1

Class 7

Grade 4N Class 2

Class 7A

Grade 4N Class 3

Class 7B

Grade 5 Class 1

Class 8

Grade 5 Class 2

Class 8A

Grade 11 Class 4

Class 11C

Grade 22 Class 3

Class 22B

Grade 22 Class 4

Class 22C

Grade 22 Class 5

Class 22D

Grade 22V

Class 22V

Grade 3V

Class 3V

1.3 The values stated in either inch-pound units or SI (metric) units are to be regarded separately as the standard. Within the text and tables, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.4 Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch-pound units.


This specification covers quenched and tempered carbon and alloy steel forgings for pressure vessel components. Heat and product analyses shall be performed to evaluate material conformance with chemical composition requirements. Tension and Charpy V-notch tests shall also be carried out to assess material conformance with mechanical property requirements such as, tensile strength, yield strength, elongation, reduction of area, and Charpy value. Sampling of test specimens for mechanical examination shall be done by either one of four methods specified by the purchaser. Repair welding may also be made at the option of the purchaser.


SDO ASTM: ASTM International
Document Number A541
Publication Date March 1, 2015
Language en - English
Page Count 5
Revision Level 05(2015)
Supercedes
Committee A01.06
Publish Date Document Id Type View
March 1, 2005 A0541_A0541M-05 Revision
March 1, 2004 A0541_A0541M-04 Revision
March 1, 2020 A0541_A0541M-05R20 Reaffirmation
March 1, 2015 A0541_A0541M-05R15 Reaffirmation
Oct. 1, 2010 A0541_A0541M-05R10 Reaffirmation
Sept. 10, 1999 A0541_A0541M-95R99 Reaffirmation