Logo

ASTM A540/A540M-11

Historical Revision

Standard Specification for Alloy-Steel Bolting for Special Applications

$83.00

$83.00

$149.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers regular and special-quality alloy steel bolting that may be used for nuclear and other special applications. See Specification for the definition of bolting.

1.2 The following referenced common requirements are indispensable for application of this specification: Specification .

1.3 Supplementary requirements of an optional nature are provided for use at the option of the purchaser. These supplementary requirements only apply when specified individually by the purchaser in the purchase order or contract.

1.4 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable M specification designation (SI units), inch-pound units shall apply.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.


This specification covers a group of common requirements that shall apply to steel flanges, forged fittings, valves, and parts for piping applications under any of the following individual product specifications. This specification covers regular and special-quality alloy steel bolting materials which may be used for nuclear and other special applications. Bolting materials as used in this specification cover rolled or forged bars, rotary pierced or extruded seamless tubes, bored bars, or forged hollows from forged or rolled bar segments to be manufactured into bolts, studs, washers, and nuts. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, chromium, nickel, molybdenum, vanadium. Material which is ordered in the liquid-quenched and tempered condition shall be uniformly reheated from a temperature below the cooling transformation range to the proper austenitizing temperature. It shall be quenched in a liquid medium under substantially uniform conditions and then uniformly reheated for tempering. Tensile test, hardness, and impact test shall be measured to conform to the required mechanical properties.


SDO ASTM: ASTM International
Document Number A540
Publication Date Nov. 1, 2011
Language en - English
Page Count 7
Revision Level 11
Supercedes
Committee A01.22
Publish Date Document Id Type View
March 1, 2024 A0540_A0540M-24 Revision
Nov. 1, 2015 A0540_A0540M-15 Revision
Nov. 1, 2011 A0540_A0540M-11 Revision
Nov. 1, 2010 A0540_A0540M-10A Revision
April 1, 2010 A0540_A0540M-10 Revision
March 1, 2006 A0540_A0540M-06 Revision
March 1, 2005 A0540_A0540M-05 Revision
May 1, 2004 A0540_A0540M-04 Revision
March 10, 2000 A0540_A0540M-00 Revision
Sept. 1, 2021 A0540_A0540M-15R21 Reaffirmation