Logo

ASTM A530/A530M-04

Historical Revision

Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers a group of requirements which, with the exceptions of Section 5.3, Section 13, Section 20, and Section 21, are mandatory requirements to the ASTM pipe product specifications noted below unless the product specification specifies different requirements, in which case the requirement of the product specification shall prevail.

1.2 Sections 5.3 or 20 are mandatory if the product specification has a requirement for product analysis or flattening tests.

1.3 Section 21 is mandatory if the product specification has a hydrostatic test requirement without defining the test parameters.

1.4 Section 13 is for information only.

1.5 In case of conflict between a requirement of the product specification and a requirement of this general requirement specification, only the requirement of the product specification need be satisfied.

These designations refer to the latest issue of the respective specifications.

Title of Specification ASTM Designation
Seamless Carbon Steel Pipe for High-Temperature ServiceA 106
Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission SystemsA 381
Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature ServiceA 426
Centrifugally Cast Austenitic Steel Pipe for High-Temperature ServiceA 451
Seamless Carbon Steel Pipe for Atmospheric and Lower TemperaturesA 524
Centrifugally Cast Iron-Chromium-Nickel High-AlloyTubing for Pressure Application at High Temperatures A 608
Centrifugally Cast Carbon Steel Pipe for High-Temperature ServiceA 660
Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures A 671
Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate TemperaturesA 672
Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures A 691
Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments A 872

1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation (SI) of the product specification is specified in the order.

Note 1—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as "nominal diameter," "size," and "nominal size."


SDO ASTM: ASTM International
Document Number A530
Publication Date March 1, 2004
Language en - English
Page Count 8
Revision Level 04
Supercedes
Committee A01.09
Publish Date Document Id Type View
Sept. 1, 2018 A0530_A0530M-18 Revision
May 1, 2012 A0530_A0530M-12 Revision
Oct. 1, 2004 A0530_A0530M-04A Revision
March 1, 2004 A0530_A0530M-04 Revision
Sept. 10, 2003 A0530_A0530M-03 Revision
Sept. 10, 2002 A0530_A0530M-02 Revision
Sept. 10, 1999 A0530_A0530M-99E01 Revision
April 1, 2010 A0530_A0530M-04AR10 Reaffirmation