Logo

ASTM A514/A514M-05(2009)

Historical Reaffirmation

Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

$73.00

$73.00

$131.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers quenched and tempered alloy steel plates of structural quality in thicknesses of 6 in. [150 mm] and under intended primarily for use in welded bridges and other structures.

Note 1—All grades are not available in a maximum thickness of 6 in. [150 mm]. See Table 1 for thicknesses available in each grade.

1.2 If the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X 3 of Specification A6/A6M for information on weldability.

1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other, without combining values in any way.


This specification covers high-yield, quenched, and tempered alloy steel plates for use in welded bridges and other structures. Plates shall be subjected to heat treatment to conform to the tensile and hardness requirements for thickness, tensile strength, yield strength, elongation, reduction of area, and Brinell hardness. Heat and product analysis shall conform to the chemical requirements for carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, molybdenum, vanadium, titanium, zirconium, copper, boron, and columbium. Conformance to required mechanical properties shall be determined by tension and hardness tests.


SDO ASTM: ASTM International
Document Number A514
Publication Date Oct. 1, 2009
Language en - English
Page Count 3
Revision Level 05(2009)
Supercedes
Committee A01.02
Publish Date Document Id Type View
Sept. 1, 2022 A0514_A0514M-22 Revision
Nov. 15, 2018 A0514_A0514M-18E01 Revision
Nov. 15, 2018 A0514_A0514M-18 Revision
May 1, 2014 A0514_A0514M-14 Revision
Oct. 15, 2013 A0514_A0514M-13 Revision
Sept. 1, 2005 A0514_A0514M-05 Revision
Sept. 10, 2000 A0514_A0514M-00A Revision
Oct. 1, 2009 A0514_A0514M-05R09 Reaffirmation