Logo

ASTM A512-06

Historical Revision

Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


...

1.1 This specification covers cold-drawn buttweld carbon steel tubes for use as mechanical tubing.

1.2 This specification covers round, square, rectangular, and special shape mechanical tubing.

1.3 Round tube size ranges covered are outside diameters up to 3 1/2 in. (88.9 mm) and wall thickness from 0.035 to 0.500 in. (0.89 to 12.70 mm).

1.4 Optional supplementary requirements are provided and, when desired, shall be so stated in the order.

1.5 The values stated in inch-pound-units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.


This specification covers cold-drawn buttweld carbon steel tubes for use as round, square, rectangular or special shape mechanical tubing. The carbon steel can be made unless a specific type of melting process is required by the purchaser. Heat and product analysis shall be made to determine the specified percentages of chemical elements to which steel tubes shall conform to. The tubing shall be free of injurious defects and shall have a workmanlike finish. Unless otherwise specified, both outside and inside surfaces of the tubing shall be coated with a film of rust-retarding oil before shipping.


SDO ASTM: ASTM International
Document Number A512
Publication Date Oct. 1, 2006
Language en - English
Page Count 7
Revision Level 06
Supercedes
Committee A01.09
Publish Date Document Id Type View
Sept. 1, 2018 A0512-18 Revision
Nov. 1, 2017 A0512-17 Revision
Oct. 1, 2006 A0512-06 Revision
Oct. 10, 1996 A0512-96 Revision
March 1, 2012 A0512-06R12 Reaffirmation
Oct. 1, 2005 A0512-96R05 Reaffirmation
Oct. 10, 1996 A0512-96R01 Reaffirmation