Logo

ASTM A511/A511M-11

Historical Revision

Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar

$91.00

$91.00

$163.80

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers seamless stainless tubing for use in mechanical applications where corrosion-resistant or high-temperature strength is needed. The grades covered are listed in Table 1, Table 2, and Table 3.

1.2 This specification covers seamless cold-finished mechanical tubing and seamless hot-finished mechanical tubing in sizes up to 12¾ in. [325 mm] in outside nominal diameter (for round tubing) with wall thicknesses as required.

1.3 Tubes shall be furnished in one of the following shapes, as specified by the purchaser: round, square, rectangular, or special.

1.4 Optional supplementary requirements are provided and when desired, shall be stated in the order.

1.5 The values stated in inch-pound units are to be regarded as the standard. Within the text, the SI units are shown in square brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other.


This specification covers seamless stainless tubing for use in mechanical applications where corrosion-resistant or high-temperature strength is needed. The steel may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The tubes shall be made by a seamless process and by either cold working or hot working as specified. Seamless steel tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel and then cold finishing the hot-worked tubing to produce the desired shape, dimensions and properties All austenitic tubes shall be furnished in the annealed condition. An analysis of each heat of steel shall be made to determine the percentages of the elements specified. If secondary melting processes are employed, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt.


SDO ASTM: ASTM International
Document Number A511
Publication Date Oct. 1, 2011
Language en - English
Page Count 11
Revision Level 11
Supercedes
Committee A01.10
Publish Date Document Id Type View
Nov. 1, 2021 A0511_A0511M-21A Revision
Sept. 1, 2021 A0511_A0511M-21 Revision
Nov. 1, 2020 A0511_A0511M-20 Revision
May 1, 2016 A0511_A0511M-16 Revision
May 1, 2015 A0511_A0511M-15A Revision
Jan. 1, 2015 A0511_A0511M-15 Revision
March 1, 2012 A0511_A0511M-12 Revision
Oct. 1, 2011 A0511_A0511M-11 Revision
Jan. 1, 2008 A0511_A0511M-08 Revision
Nov. 1, 2007 A0511_A0511M-07 Revision