Logo

ASTM A480/A480M-24

Historical Revision

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

$119.00

$119.00

$214.20

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 This specification2 covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual specification, shall apply to rolled steel plate, sheet, and strip, under each of the following specifications issued by ASTM: Specifications A240/A240M, A263, A264, A265, A666, A693, A793, and A895.

1.2 In the case of conflict between a requirement of a product specification and a requirement of this specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this specification and a more stringent requirement of the purchase order, the purchase order shall prevail. The purchase order requirements shall not take precedence if they, in any way, violate the requirements of the product specification or this specification; for example, by waiving a test requirement or by making a test requirement less stringent.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The SI units are shown in brackets, except that when A480M is specified, Annex A3 shall apply for the dimensional tolerances and not the bracketed SI values in Annex A2. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.4 This specification and the applicable material specifications are expressed in both inch-pound and SI units. However, unless the order specifies the applicable “M” specification designation [SI units], the material shall be furnished in inch-pound units.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


This specification covers general requirements for flat-rolled stainless and heat-resisting steel plate, sheet, and strip. The steel shall be made by one of the following processes: electric-arc, electric-induction, or other suitable processes. Heat and product analyses shall conform to the chemical requirements for each of the specific elements. The material shall undergo mechanical tests such as tension test, hardness test, and bend test. Special tests like intergranular corrosion test, permeability test, Charpy impact testing and tests for detrimental intermetallic phases in wrought duplex stainless steels shall be also be performed when required.


SDO ASTM: ASTM International
Document Number A480
Publication Date May 15, 2024
Language en - English
Page Count 26
Revision Level 24
Supercedes
Committee A01.17
Publish Date Document Id Type View
Nov. 15, 2024 A0480_A0480M-24A Revision
May 15, 2024 A0480_A0480M-24 Revision
Nov. 1, 2023 A0480_A0480M-23B Revision
Sept. 1, 2023 A0480_A0480M-23A Revision
March 1, 2023 A0480_A0480M-23 Revision
Sept. 1, 2022 A0480_A0480M-22A Revision
May 1, 2022 A0480_A0480M-22 Revision
July 1, 2020 A0480_A0480M-20A Revision
March 1, 2020 A0480_A0480M-20 Revision
Nov. 1, 2019 A0480_A0480M-19A Revision
Sept. 1, 2019 A0480_A0480M-19 Revision
Dec. 1, 2018 A0480_A0480M-18A Revision
Sept. 1, 2018 A0480_A0480M-18 Revision
Nov. 1, 2017 A0480_A0480M-17 Revision
Dec. 1, 2016 A0480_A0480M-16B Revision
April 15, 2016 A0480_A0480M-16A Revision
Feb. 1, 2016 A0480_A0480M-16 Revision
Sept. 1, 2015 A0480_A0480M-15 Revision
Oct. 1, 2014 A0480_A0480M-14B Revision
May 1, 2014 A0480_A0480M-14A Revision
March 1, 2014 A0480_A0480M-14 Revision
Nov. 1, 2013 A0480_A0480M-13B Revision
Oct. 1, 2013 A0480_A0480M-13A Revision
May 1, 2013 A0480_A0480M-13 Revision
April 1, 2012 A0480_A0480M-12 Revision
Dec. 1, 2011 A0480_A0480M-11B Revision
April 1, 2011 A0480_A0480M-11A Revision
Feb. 15, 2011 A0480_A0480M-11 Revision
Dec. 1, 2010 A0480_A0480M-10A Revision
April 1, 2010 A0480_A0480M-10 Revision
Nov. 15, 2009 A0480_A0480M-09B Revision
Oct. 1, 2009 A0480_A0480M-09A Revision
April 1, 2009 A0480_A0480M-09 Revision
Oct. 1, 2008 A0480_A0480M-08B Revision
May 15, 2008 A0480_A0480M-08A Revision
April 1, 2008 A0480_A0480M-08 Revision
Sept. 1, 2006 A0480_A0480M-06B Revision
June 15, 2006 A0480_A0480M-06A Revision
March 15, 2006 A0480_A0480M-06 Revision
Sept. 15, 2005 A0480_A0480M-05 Revision
Sept. 1, 2004 A0480_A0480M-04A Revision
March 1, 2004 A0480_A0480M-04 Revision
Oct. 1, 2003 A0480_A0480M-03C Revision
May 10, 2003 A0480_A0480M-03B Revision
April 10, 2003 A0480_A0480M-03A Revision
Feb. 10, 2003 A0480_A0480M-03 Revision
Dec. 10, 2001 A0480_A0480M-99B Revision
Dec. 10, 2001 A0480_A0480M-02 Revision
Dec. 10, 2001 A0480_A0480M-01B Revision
Dec. 10, 2001 A0480_A0480M-01A Revision
Dec. 10, 2001 A0480_A0480M-01 Revision
Dec. 10, 2001 A0480_A0480M-00 Revision