Logo

ASTM A450/A450M-04

Historical Revision

Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

$83.00

$83.00

$149.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers a group of requirements which, with the exceptions of 4.3 and Sections 5, 6, 17, 18, 19, 20, 21, 22, and 23, are mandatory requirements to the following ASTM tubular product specifications:

These designations refer to the latest issue of the respective specifications.

Title of SpecificationASTM Designation
Electric-Resistance-Welded Carbon Steel and Carbon Manganese Steel Boiler TubesA 178/A 178M
Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser TubesA 179/A 179M
Seamless Carbon Steel Boiler Tubes for High-Pressure ServiceA 192/A 192M
Seamless Medium-Carbon Steel Boiler and Superheater Tubes A 210/A 210M
Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser TubesA 214/A 214M
Seamless and Electric-Welded Low-Alloy Steel Tubes A 423/A 423M
Electric-Resistance-Welded Coiled Steel Tubing for Gasand Fuel Oil Lines A 539
Seamless Cold-Drawn Carbon Steel Feedwater Heater TubesA 556/A 556M
Seamless, Cold-Drawn Carbon Steel Tubing for Hydraulic System ServiceA 822

1.2 One or more of Sections 4.3, 5, 6, 17, 18, 19, 20, 20.1, 22, and 23 apply when the product specification or purchase order has a requirement for the test or analysis described by these sections.

1.3 In case of conflict between a requirement of the product specification and a requirement of this general requirement specification only the requirement of the product specification need be satisfied.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation (SI) of the product specification is specified in the order.


SDO ASTM: ASTM International
Document Number A450
Publication Date March 1, 2004
Language en - English
Page Count 10
Revision Level 04
Supercedes
Committee A01.09
Publish Date Document Id Type View
Oct. 15, 2024 A0450_A0450M-24 Revision
Nov. 1, 2023 A0450_A0450M-23 Revision
Nov. 1, 2021 A0450_A0450M-21 Revision
Nov. 1, 2018 A0450_A0450M-18A Revision
Sept. 1, 2018 A0450_A0450M-18 Revision
May 1, 2015 A0450_A0450M-15 Revision
May 1, 2010 A0450_A0450M-10 Revision
Oct. 1, 2009 A0450_A0450M-09 Revision
Nov. 1, 2007 A0450_A0450M-07 Revision
Oct. 1, 2004 A0450_A0450M-04A Revision
March 1, 2004 A0450_A0450M-04 Revision
Sept. 10, 2003 A0450_A0450M-03 Revision
Sept. 10, 2002 A0450_A0450M-02 Revision
Oct. 10, 1996 A0450_A0450M-96A Revision
Oct. 10, 1996 A0450_A0450M-96AR01 Reaffirmation