Logo

ASTM A414/A414M-05

Historical Revision

Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers hot-rolled carbon steel sheet for pressure vessels involving fusion welding or brazing. Welding and brazing technique is of fundamental importance and shall be in accordance with commercial practices.

1.2 The following grades are included in this specification:

Mechanical Requirements
GradeYield Strength, minTensile Strength, min
ksiMPa ksiMPa
A2517045310
B3020550345
C3323055380
D3524060415
E3826065450
F4229070485
G4531075515

1.3 Hot-rolled carbon steel sheet is generally furnished in cut lengths and to decimal thickness only. Coils may be furnished, provided tension test specimens are taken to represent the middle of the slab as required by . The purchaser should recognize this requires cutting the coils to obtain test samples and results in half-size coils. The sheet is furnished to the following size limits:

Width, in. [mm]
Thickness, in. [mm] Over 12 to 48
[Over 300 to 1200]
Over 48
[Over 1200]
0.270 to 0.230 [7.0 to 6.0]sheet (coils only)sheet (coils only)
Under 0.230 to 0.180 [6.0 to 4.5]sheet sheet (coils only)
Under 0.180 to 0.057 [under 4.5 to 1.5]sheetsheet

A For thicknesses greater than 0.230 in. [6.0 mm], the thickness tolerances of Specification A 635/A 635M apply.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.


SDO ASTM: ASTM International
Document Number A414
Publication Date March 1, 2005
Language en - English
Page Count 4
Revision Level 05
Supercedes
Committee A01.19
Publish Date Document Id Type View
Aug. 15, 2024 A0414_A0414M-24 Revision
Nov. 1, 2023 A0414_A0414M-23 Revision
May 1, 2014 A0414_A0414M-14 Revision
May 1, 2013 A0414_A0414M-13 Revision
April 1, 2010 A0414_A0414M-10 Revision
Nov. 1, 2009 A0414_A0414M-09 Revision
May 15, 2007 A0414_A0414M-07 Revision
March 1, 2006 A0414_A0414M-06 Revision
March 1, 2005 A0414_A0414M-05 Revision
March 1, 2004 A0414_A0414M-04 Revision
Sept. 10, 2001 A0414_A0414M-01 Revision
Sept. 10, 2001 A0414_A0414M-00 Revision
Sept. 1, 2019 A0414_A0414M-14R19 Reaffirmation