Logo

ASTM A370-14

Historical Revision

Standard Test Methods and Definitions for Mechanical Testing of Steel Products

$129.00

$129.00

$232.20

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 These test methods2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided, and standard methods of testing are to be followed to obtain reproducible and comparable results. In those cases in which the testing requirements for certain products are unique or at variance with these general procedures, the product specification testing requirements shall control.

1.2 The following mechanical tests are described:

Sections

Tension

6 to 14

Bend

15

Hardness

16

 Brinell

17

 Rockwell

18

 Portable

19

Impact

20 to 29

Keywords

30

1.3 Annexes covering details peculiar to certain products are appended to these test methods as follows:

Annex

Bar Products

A1.1

Tubular Products

Annex A2

Fasteners

Annex A3

Round Wire Products

Annex A4

Significance of Notched-Bar Impact Testing

Annex A5

Converting Percentage Elongation of Round Specimens to
 Equivalents for Flat Specimens

Annex A6

Testing Multi-Wire Strand

Annex A7

Rounding of Test Data

Annex A8

Methods for Testing Steel Reinforcing Bars

Annex A9

Procedure for Use and Control of Heat-Cycle Simulation

Annex A10

1.4 The values stated in inch-pound units are to be regarded as the standard.

1.5 When this document is referenced in a metric product specification, the yield and tensile values may be determined in inch-pound (ksi) units then converted into SI (MPa) units. The elongation determined in inch-pound gauge lengths of 2 or 8 in. may be reported in SI unit gauge lengths of 50 or 200 mm, respectively, as applicable. Conversely, when this document is referenced in an inch-pound product specification, the yield and tensile values may be determined in SI units then converted into inch-pound units. The elongation determined in SI unit gauge lengths of 50 or 200 mm may be reported in inch-pound gauge lengths of 2 or 8 in., respectively, as applicable.

1.6 Attention is directed to ISO/IEC 17025 when there may be a need for information on criteria for evaluation of testing laboratories.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


SDO ASTM: ASTM International
Document Number A370
Publication Date May 15, 2014
Language en - English
Page Count 50
Revision Level 14
Supercedes
Committee A01.13
Publish Date Document Id Type View
Oct. 15, 2024 A0370-24A Revision
March 1, 2024 A0370-24 Revision
Sept. 15, 2023 A0370-23 Revision
Oct. 1, 2022 A0370-22 Revision
Nov. 1, 2021 A0370-21 Revision
Aug. 1, 2020 A0370-20 Revision
July 1, 2019 A0370-19E01 Revision
July 1, 2019 A0370-19 Revision
Dec. 1, 2018 A0370-18 Revision
Nov. 15, 2017 A0370-17A Revision
Jan. 1, 2017 A0370-17 Revision
May 1, 2016 A0370-16 Revision
Nov. 1, 2015 A0370-15 Revision
May 15, 2014 A0370-14 Revision
Nov. 15, 2013 A0370-13 Revision
Oct. 15, 2012 A0370-12A Revision
March 15, 2012 A0370-12 Revision
Nov. 15, 2011 A0370-11A Revision
May 1, 2011 A0370-11 Revision
June 15, 2010 A0370-10 Revision
June 1, 2009 A0370-09AE01 Revision
June 1, 2009 A0370-09A Revision
Jan. 1, 2009 A0370-09 Revision
Oct. 15, 2008 A0370-08B Revision
April 14, 2008 A0370-08A Revision
April 1, 2008 A0370-08 Revision
Nov. 1, 2007 A0370-07B Revision
June 1, 2007 A0370-07A Revision
April 1, 2007 A0370-07 Revision
Nov. 1, 2006 A0370-06 Revision
May 1, 2005 A0370-05 Revision
June 10, 2003 A0370-03A Revision
June 10, 2003 A0370-03 Revision
Jan. 10, 2002 A0370-02E01 Revision
Dec. 10, 2001 A0370-97A Revision
Dec. 10, 2001 A0370-02 Revision
Dec. 10, 2001 A0370-01 Revision
Not Available A0370-94 Revision
Not Available A0370-68 Revision