Logo

ASTM A36/A36M-19

Current Revision

Standard Specification for Carbon Structural Steel

$61.00

$61.00

$109.80

$73.00

$73.00

$131.40



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification2 covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes.

1.2 Supplementary requirements are provided for use where additional testing or additional restrictions are required by the purchaser. Such requirements apply only when specified in the purchase order.

1.3 When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.

1.4 The text of this specification contains notes or footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements.

1.5 For structural products produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A6/A6M apply.

1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other, without combining values in any way.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


This specification covers carbon structural steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. Heat analysis shall be used to determine the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test and must conform to the required tensile properties.


SDO ASTM: ASTM International
Document Number A36
Publication Date July 1, 2019
Language en - English
Page Count 3
Revision Level 19
Supercedes
Committee A01.02
Publish Date Document Id Type View
July 1, 2019 A0036_A0036M-19 Revision
Dec. 1, 2014 A0036_A0036M-14 Revision
Nov. 1, 2012 A0036_A0036M-12 Revision
May 15, 2008 A0036_A0036M-08 Revision
March 1, 2005 A0036_A0036M-05 Revision
April 1, 2004 A0036_A0036M-04 Revision
May 10, 2003 A0036_A0036M-03A Revision
April 10, 2003 A0036_A0036M-03 Revision
Dec. 10, 2002 A0036_A0036M-02 Revision
Sept. 10, 2001 A0036_A0036M-01 Revision
Sept. 10, 2001 A0036_A0036M-00A Revision
Not Available A0036_A0036M-97AE01 Revision