Logo

ASTM A358/A358M-01

Historical Revision

Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers electric-fusion-welded austenitic chromium-nickel alloy steel pipe suitable for corrosive or high-temperature service, or both.

Note 1--The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as "nominal diameter," "size," and "nominal size."

<>

1.2 This specification covers nineteen grades of alloy steel as indicated in . The selection of the proper alloy and requirements for heat treatment shall be at the discretion of the purchaser, dependent on the service conditions to be encountered.

1.3 Five classes of pipe are covered as follows:

1.3.1 Class 1--Pipe shall be double welded by processes employing filler metal in all passes and shall be completely radiographed.

1.3.2 Class 2--Pipe shall be double welded by processes employing filler metal in all passes. No radiography is required.

1.3.3 Class 3--Pipe shall be single welded by processes employing filler metal in all passes and shall be completely radiographed.

1.3.4 Class 4--Same as Class 3 except that the weld pass exposed to the inside pipe surface may be made without the addition of filler metal (see 6.2.2.1and 6.2.2.2 ).

1.3.5 Class 5--Pipe shall be double welded by processes employing filler metal in all passes and shall be spot radiographed.

1.4 Supplementary requirements covering provisions ranging from additional testing to formalized procedures for manufacturing practice are provided. Supplementary Requirements S1 through S6 are included as options to be specified when desired.

1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.


SDO ASTM: ASTM International
Document Number A358
Publication Date March 10, 2001
Language en - English
Page Count 6
Revision Level 01
Supercedes
Committee A01.10
Publish Date Document Id Type View
March 1, 2024 A0358_A0358M-24 Revision
Nov. 1, 2019 A0358_A0358M-19 Revision
Sept. 1, 2015 A0358_A0358M-15 Revision
May 1, 2014 A0358_A0358M-14A Revision
March 1, 2014 A0358_A0358M-14 Revision
Dec. 1, 2012 A0358_A0358M-12 Revision
Dec. 15, 2008 A0358_A0358M-08A Revision
March 1, 2008 A0358_A0358M-08 Revision
March 1, 2005 A0358_A0358M-05 Revision
March 1, 2004 A0358_A0358M-04 Revision
March 10, 2001 A0358_A0358M-01 Revision
March 10, 2001 A0358_A0358M-00 Revision
Not Available A0358_A0358M-95AE01 Revision