Logo

ASTM A350/A350M-00b

Historical Revision

Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers several grades of carbon and low-alloy steel forged or ring-rolled flanges, forged fittings and valves intended primarily for low-temperature service and requiring notch toughness testing. They are made to specified dimensions, or to dimensional standards, such as the ASME and API Specifications referenced in Section 2. Although this specification covers some piping components machined from rolled bar and seamless tubular materials (see 5.3.3), it does not cover raw material produced in these product forms.

1.2 No limitation on size is intended beyond the ability of the manufacturer to obtain the specified requirements. However, Class 3 of Grade LF787 is only available in the quenched-and-precipitation heat treated condition.

1.3 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified by the purchaser in the order.

1.4 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable "M" specification designation (SI units), the material shall be furnished to inch-pound units.

1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Note 1—Refer to Test Methods and Definitions A370 for notes on significance of notched-bar impact testing.


SDO ASTM: ASTM International
Document Number A350
Publication Date March 10, 2002
Language en - English
Page Count 8
Revision Level 00b
Supercedes
Committee A01.22
Publish Date Document Id Type View
Oct. 15, 2024 A0350_A0350M-24B Revision
May 1, 2024 A0350_A0350M-24A Revision
March 1, 2024 A0350_A0350M-24 Revision
May 1, 2023 A0350_A0350M-23 Revision
May 1, 2018 A0350_A0350M-18 Revision
Sept. 1, 2017 A0350_A0350M-17 Revision
May 1, 2015 A0350_A0350M-15 Revision
Oct. 1, 2014 A0350_A0350M-14 Revision
Oct. 1, 2013 A0350_A0350M-13 Revision
March 1, 2012 A0350_A0350M-12 Revision
Oct. 1, 2011 A0350_A0350M-11 Revision
Nov. 1, 2010 A0350_A0350M-10 Revision
Nov. 1, 2007 A0350_A0350M-07 Revision
Oct. 1, 2004 A0350_A0350M-04A Revision
March 1, 2004 A0350_A0350M-04 Revision
Sept. 10, 2002 A0350_A0350M-02B Revision
June 10, 2002 A0350_A0350M-02A Revision
March 10, 2002 A0350_A0350M-02 Revision
March 10, 2002 A0350_A0350M-00C Revision
March 10, 2002 A0350_A0350M-00B Revision
Not Available A0350_A0350M-97 Revision