Logo

ASTM A335/A335M-10b

Historical Revision

Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

$83.00

$83.00

$149.40

$0.00

$0.00

$0.00



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high-temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics.

1.2 Several grades of ferritic steels (see Note 1) are covered. Their compositions are given in Table 1.

Note 1—Ferritic steels in this specification are defined as low- and intermediate-alloy steels containing up to and including 10 % chromium.

1.3 Supplementary requirements (S1 to S7) of an optional nature are provided. These supplementary requirements call for additional tests to be made, and when desired, shall be so stated in the order together with the number of such tests required.


This specification covers seamless ferritic alloy-steel pipe for high-temperature service. The pipe shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Grade P2 and P12 steel pipes shall be made by coarse-grain melting practice. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.


SDO ASTM: ASTM International
Document Number A335
Publication Date Nov. 1, 2010
Language en - English
Page Count 9
Revision Level 10b
Supercedes
Committee A01.10
Publish Date Document Id Type View
Oct. 15, 2024 A0335_A0335M-24B Revision
Aug. 15, 2024 A0335_A0335M-24A Revision
April 1, 2024 A0335_A0335M-24 Revision
May 1, 2023 A0335_A0335M-23 Revision
Nov. 1, 2022 A0335_A0335M-22 Revision
Nov. 1, 2021 A0335_A0335M-21A Revision
March 1, 2021 A0335_A0335M-21 Revision
Sept. 1, 2019 A0335_A0335M-19A Revision
March 1, 2019 A0335_A0335M-19 Revision
Nov. 1, 2018 A0335_A0335M-18B Revision
Sept. 1, 2018 A0335_A0335M-18A Revision
March 1, 2018 A0335_A0335M-18 Revision
Sept. 1, 2015 A0335_A0335M-15A Revision
May 1, 2015 A0335_A0335M-15 Revision
Oct. 1, 2011 A0335_A0335M-11 Revision
Nov. 1, 2010 A0335_A0335M-10B Revision
May 1, 2010 A0335_A0335M-10A Revision
April 1, 2010 A0335_A0335M-10 Revision
Dec. 1, 2009 A0335_A0335M-09A Revision
Oct. 1, 2009 A0335_A0335M-09 Revision
May 1, 2006 A0335_A0335M-06 Revision
May 1, 2005 A0335_A0335M-05A Revision
March 1, 2005 A0335_A0335M-05 Revision
April 10, 2003 A0335_A0335M-03 Revision
Sept. 10, 2002 A0335_A0335M-02 Revision
March 10, 2001 A0335_A0335M-01 Revision
March 10, 2001 A0335_A0335M-00 Revision
Not Available A0335_A0335M-95A Revision