Logo

ASTM A333/A333M-05

Historical Revision

Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included as listed in Table 1. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.

1.2 Supplementary Requirement S1 of an optional nature is provided. This shall apply only when specified by the purchaser.

1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.

Note 1—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as "nominal diameter," "size," and "nominal size."


This specification covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. The pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements.


SDO ASTM: ASTM International
Document Number A333
Publication Date March 1, 2005
Language en - English
Page Count 7
Revision Level 05
Supercedes
Committee A01.10
Publish Date Document Id Type View
April 1, 2024 A0333_A0333M-24 Revision
Nov. 1, 2018 A0333_A0333M-18 Revision
March 1, 2016 A0333_A0333M-16 Revision
Nov. 1, 2015 A0333_A0333M-15 Revision
June 1, 2013 A0333_A0333M-13 Revision
April 1, 2011 A0333_A0333M-11 Revision
April 1, 2010 A0333_A0333M-10 Revision
March 1, 2005 A0333_A0333M-05 Revision
May 1, 2004 A0333_A0333M-04A Revision
March 1, 2004 A0333_A0333M-04 Revision
Jan. 10, 1999 A0333_A0333M-99 Revision
Not Available A0333_A0333M-94 Revision