Logo

ASTM A320/A320M-11

Historical Revision

Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers alloy steel bolting for pressure vessels, valves, flanges, and fittings for low-temperature service. See Specification for the definition of bolting. The bars shall be hot-wrought and may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be solution annealed or annealed and strain-hardened. When strain hardened austenitic stainless steel is ordered, the purchaser should take special care to ensure that Appendix X1 is thoroughly understood.

1.2 Several grades are covered, including both ferritic and austenitic steels designated L7, B8, etc. Selection will depend on design, service conditions, mechanical properties, and low-temperature characteristics. The mechanical requirements of Table 1 indicate the diameters for which the minimum mechanical properties apply to the various grades and classes, and Table 2 stipulates the requirements for Charpy impact energy absorption. The manufacturer should determine that the material can conform to these requirements before parts are manufactured. For example, when Grade L43 is specified to meet the Table 2 impact energy values at 150 °F [101 °C], additional restrictions (such as procuring a steel with lower P and S contents than might normally be supplied) in the chemical composition for AISI 4340 are likely to be required.

Note 1—The committee formulating this specification has included several grades of material that have been rather extensively used for the present purpose. Other compositions will be considered for inclusion by the committee from time to time as the need becomes apparent. Users should note that hardenability of some of the grades mentioned may restrict the maximum size at which the required mechanical properties are obtainable.

1.3 The following referenced general requirements are indispensable for application of this specification: Specification .

1.4 Nuts for use with bolting are covered in Section 10 and the nut material shall be impact tested.

1.5 Supplementary Requirements are provided for use at the option of the purchaser. The supplementary requirements shall apply only when specified in the purchase order or contract.


This specification covers alloy steel bolting materials for pressure vessels, valves, flanges, and fittings for low-temperature service. Each alloy shall conform to the prescribed chemical composition requirements. The material, as represented by the tension specimens, shall conform to the requirements as to tensile properties such as tensile strength, yield strength, elongation, and hardness. The material shall meet the prescribed impact energy absorption requirements and the recommended test temperature. Mechanical tests shall be conducted on the material, namely: impact testing, tension testing, and hardness testing.


SDO ASTM: ASTM International
Document Number A320
Publication Date May 1, 2011
Language en - English
Page Count 8
Revision Level 11
Supercedes
Committee A01.22
Publish Date Document Id Type View
Oct. 15, 2024 A0320_A0320M-24A Revision
March 1, 2024 A0320_A0320M-24 Revision
Nov. 1, 2022 A0320_A0320M-22A Revision
May 1, 2022 A0320_A0320M-22 Revision
March 1, 2021 A0320_A0320M-21A Revision
Jan. 1, 2021 A0320_A0320M-21 Revision
June 1, 2018 A0320_A0320M-18 Revision
Oct. 1, 2017 A0320_A0320M-17B Revision
May 1, 2017 A0320_A0320M-17A Revision
March 15, 2017 A0320_A0320M-17 Revision
Nov. 1, 2015 A0320_A0320M-15A Revision
May 1, 2015 A0320_A0320M-15 Revision
May 1, 2014 A0320_A0320M-14 Revision
Nov. 1, 2011 A0320_A0320M-11A Revision
May 1, 2011 A0320_A0320M-11 Revision
Nov. 1, 2010 A0320_A0320M-10A Revision
May 1, 2010 A0320_A0320M-10 Revision
March 15, 2008 A0320_A0320M-08 Revision
Sept. 1, 2007 A0320_A0320M-07A Revision
March 1, 2007 A0320_A0320M-07 Revision
July 12, 2005 A0320_A0320M-05A Revision
May 1, 2005 A0320_A0320M-05 Revision
July 1, 2004 A0320_A0320M-04 Revision
May 10, 2003 A0320_A0320M-03 Revision
March 10, 2002 A0320_A0320M-02 Revision
March 10, 2002 A0320_A0320M-01 Revision
March 10, 2002 A0320_A0320M-00B Revision
Not Available A0320_A0320M-97 Revision