Logo

ASTM A302/A302M-17(2022)

Historical Reaffirmation

Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

$61.00

$61.00

$109.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification2 covers manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates intended particularly for welded boilers and other pressure vessels.

1.2 Plates under this specification are available in four grades having different strength levels as follows:

Grade

Tensile Strength,
ksi [MPa]

Type

A

75–95 [515–655] 

manganese-molybdenum

B

80–100 [550–690]

manganese-molybdenum

C

80–100 [550–690]

manganese-molybdenum-nickel

D

80–100 [550–690]

manganese-molybdenum-nickel

1.3 The maximum thickness of plates is limited only by the capacity of the chemical composition to meet the specified mechanical property requirements.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


This specification covers manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates intended particularly for welded boilers and other pressure vessels. According to their strength levels, the plates are available in four grades: Grades A, B, C, and D. The maximum thickness of plates is limited only by the capacity of the chemical composition to meet the specified mechanical property requirements. The steel shall be killed and shall conform to fine grain size requirements. The plates shall be subjected to tension test to determine the tensile strength, yield strength, and elongation.


SDO ASTM: ASTM International
Document Number A302
Publication Date Sept. 1, 2022
Language en - English
Page Count 3
Revision Level 17(2022)
Supercedes
Committee A01.11
Publish Date Document Id Type View
Nov. 1, 2017 A0302_A0302M-17 Revision
May 1, 2012 A0302_A0302M-12 Revision
Sept. 10, 2003 A0302_A0302M-03 Revision
May 13, 1999 A0302_A0302M-97E01 Revision
Not Available A0302_A0302M-93 Revision
Sept. 1, 2022 A0302_A0302M-17R22 Reaffirmation
Nov. 1, 2007 A0302_A0302M-03R07 Reaffirmation