Logo

ASTM A29/A29M-03

Historical Revision

Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

$119.00

$119.00

$214.20


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

Document Preview Not Available...

1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel bars under each of the following ASTM specifications (or under any other ASTM specification which invokes this specification or portions thereof):

Title of SpecificationASTM DesignationA
Hot-Rolled Carbon Steel Bars:
Steel Bars, Carbon, Quenched and Tempered A321
Steel Bars and Shapes, Carbon Rolled from "T'' Rails A499
Steel Bars, Carbon, Merchant Quality, M-Grades A575
Steel Bars, Carbon, Hot-Wrought, Special Quality A576
Steel Bars, Carbon, Merchant Quality, Mechanical Properties A663
Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties A675
Steel Bars for Springs, Carbon and Alloy A689
Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications A695
Cold-Finished Carbon Steel Bars:
Steel Bars, Carbon, Cold-Finished, Standard Quality A108
Stress-Relieved Steel Bars Subject to Mechanical Property Requirements, Cold-Drawn CarbonA311/A311M
Hot-Rolled Alloy Steel Bars:
Steel Bars, Alloy, Standard GradesA322
Steel Bars, Alloy, Subject to End-Quench Hardenability Requirements A304
Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered A434
Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both A739
Cold-Finished Alloy Steel Bars:
Steel Bars, Alloy, Cold-FinishedA331
Steel Bars, Alloy, Hot-Rolled or Cold-Finished, Quenched and Tempered A434
Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components A696

AThese designations refer to the latest issue of the respective specifications, which appear either in the Annual Book of ASTM Standards, Vol 01.05, or as reprints obtainable from ASTM.

1.2 In case of any conflict in requirements, the requirements of the purchase order, the individual material specification, and this general specification shall prevail in the sequence named.

1.3 The values stated in inch-pound units or SI units are to be regarded as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.4 For purposes of determining conformance to this specification and the various material specifications referenced in 1.1, dimensional values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values in accordance with the rounding method of Practice E29.


SDO ASTM: ASTM International
Document Number A29
Publication Date Sept. 10, 2003
Language en - English
Page Count 21
Revision Level 03
Supercedes
Committee A01.15
Publish Date Document Id Type View
July 1, 2023 A0029_A0029M-23 Revision
July 1, 2020 A0029_A0029M-20 Revision
Dec. 1, 2016 A0029_A0029M-16 Revision
Nov. 1, 2015 A0029_A0029M-15 Revision
May 1, 2012 A0029_A0029M-12E01 Revision
May 1, 2012 A0029_A0029M-12 Revision
Oct. 1, 2011 A0029_A0029M-11A Revision
April 1, 2011 A0029_A0029M-11 Revision
May 1, 2005 A0029_A0029M-05 Revision
March 1, 2004 A0029_A0029M-04E01 Revision
March 1, 2004 A0029_A0029M-04 Revision
Sept. 10, 2003 A0029_A0029M-03 Revision
Aug. 10, 1999 A0029_A0029M-99E01 Revision