Logo

ASTM A283/A283M-24

Current Revision

Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

$61.00

$61.00

$109.80

$73.00

$73.00

$131.40



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification2 covers two grades (C and D) of carbon steel plates of structural quality for general application.

1.2 When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.

1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4 For plate produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A6/A6M apply.

1.5 This specification contains notes or footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


This specification covers four grades of carbon steel plates of structural quality for general application. Steel samples shall be melt processed by either open-hearth, basic-oxygen, or electric furnace. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, sulfur, silicon, and copper. Steel specimens shall also undergo tensile tests and shall conform to required values of tensile strength, yield point, and elongation.


SDO ASTM: ASTM International
Document Number A283
Publication Date March 1, 2024
Language en - English
Page Count 3
Revision Level 24
Supercedes
Committee A01.02
Publish Date Document Id Type View
March 1, 2024 A0283_A0283M-24 Revision
June 1, 2018 A0283_A0283M-18 Revision
Nov. 15, 2013 A0283_A0283M-13 Revision
Nov. 1, 2012 A0283_A0283M-12A Revision
Aug. 1, 2012 A0283_A0283M-12 Revision
April 10, 2003 A0283_A0283M-03 Revision
March 10, 2000 A0283_A0283M-00 Revision
Sept. 1, 2007 A0283_A0283M-03R07 Reaffirmation