Logo

ASTM A275/A275M-06

Historical Revision

Standard Practice for Magnetic Particle Examination of Steel Forgings

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This test method covers a procedure for magnetic particle examination of steel forgings. The procedure will produce consistent results upon which acceptance standards can be based. This standard does not contain acceptance standards or recommended quality levels.

1.2 Only direct current or rectified alternating (full or half wave) current shall be used as the electric power source for any of the magnetizing methods. Alternating current is not permitted because its capability to detect subsurface discontinuities is very limited and therefore unsuitable.

1.2.1 Portable battery powered electromagnetic yokes are outside the scope of this test method.

Note 1—Guide E 709 may be utilized for magnetic particle examination in the field for machinery components originally manufactured from steel forgings.

1.3 The minimum requirements for magnetic particle examination shall conform to practice standards of Practice E 1444. If the requirements of this test method are in conflict with the requirements of Practice E 1444, the requirements of this test method shall prevail.

1.4 This specification and the applicable material specifications are expressed in both inch-pound units and SI units. However, unless the order specifies the applicable "M" specification designation [SI units], the material shall be furnished to inch-pound units.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; hterefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


SDO ASTM: ASTM International
Document Number A275
Publication Date May 1, 2006
Language en - English
Page Count 7
Revision Level 06
Supercedes
Committee A01.06
Publish Date Document Id Type View
Nov. 1, 2023 A0275_A0275M-23 Revision
May 1, 2018 A0275_A0275M-18 Revision
May 1, 2015 A0275_A0275M-15 Revision
Nov. 1, 2008 A0275_A0275M-08 Revision
Sept. 1, 2007 A0275_A0275M-07 Revision
May 1, 2006 A0275_A0275M-06 Revision
Sept. 10, 1998 A0275_A0275M-98 Revision
March 1, 2023 A0275_A0275M-18R23 Reaffirmation
April 1, 2013 A0275_A0275M-08R13 Reaffirmation
April 10, 2003 A0275_A0275M-98R03 Reaffirmation