Logo

ASTM A193/A193M-01b

Historical Revision

Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

$91.00

$91.00

$163.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers alloy and stainless steel bolting material for pressure vessels, valves, flanges, and fittings for high-temperature service. The term bolting material as used in this specification covers bars, bolts, screws, studs, stud bolts, and wire. Bars and wire shall be hot-wrought. The material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be carbide solution treated or carbide solution treated and strain-hardened. When strain hardened austenitic steel is ordered, the purchaser should take special care to ensure that Appendix X1 is thoroughly understood.

1.2 Several grades are covered, including ferritic steels and austenitic stainless steels designated B5, B8, and so forth. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics.

Note 1—The committee formulating this specification has included fifteen steel types that have been rather extensively used for the present purpose. Other compositions will be considered for inclusion by the committee from time to time as the need becomes apparent.

<>Note 2—For grades of alloy-steel bolting material suitable for use at the lower range of high-temperature applications, reference should be made to Specification A354.

Note 3—For grades of alloy-steel bolting material suitable for use in low-temperature applications, reference should be made to Specification A320/A320M.

1.3 Nuts for use with this bolting material are covered in Section 13.

1.4 Supplementary Requirements S1 through S10 are provided for use when additional tests or inspection are desired. These shall apply only when specified in the purchase order.

1.5 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable M specification designation (SI units), the material shall be furnished to inch-pound units.

1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.


SDO ASTM: ASTM International
Document Number A193
Publication Date Oct. 10, 2001
Language en - English
Page Count 13
Revision Level 01b
Supercedes
Committee A01.22
Publish Date Document Id Type View
Oct. 15, 2024 A0193_A0193M-24A Revision
March 1, 2024 A0193_A0193M-24 Revision
March 1, 2023 A0193_A0193M-23 Revision
Nov. 1, 2022 A0193_A0193M-22A Revision
Sept. 1, 2022 A0193_A0193M-22 Revision
May 15, 2020 A0193_A0193M-20 Revision
Nov. 1, 2019 A0193_A0193M-19 Revision
Nov. 15, 2017 A0193_A0193M-17 Revision
March 1, 2016 A0193_A0193M-16 Revision
Nov. 1, 2015 A0193_A0193M-15A Revision
June 1, 2015 A0193_A0193M-15 Revision
Nov. 15, 2014 A0193_A0193M-14A Revision
June 1, 2014 A0193_A0193M-14 Revision
Aug. 8, 2012 A0193_A0193M-12B Revision
March 1, 2012 A0193_A0193M-12 Revision
Nov. 1, 2011 A0193_A0193M-11A Revision
May 1, 2011 A0193_A0193M-11 Revision
May 15, 2010 A0193_A0193M-10A Revision
May 1, 2010 A0193_A0193M-10 Revision
June 1, 2009 A0193_A0193M-09 Revision
Aug. 1, 2008 A0193_A0193M-08B Revision
May 1, 2008 A0193_A0193M-08A Revision
April 1, 2008 A0193_A0193M-08 Revision
March 1, 2007 A0193_A0193M-07 Revision
March 1, 2006 A0193_A0193M-06A Revision
Jan. 15, 2006 A0193_A0193M-06 Revision
June 1, 2005 A0193_A0193M-05 Revision
Oct. 1, 2004 A0193_A0193M-04C Revision
July 1, 2004 A0193_A0193M-04B Revision
May 11, 2004 A0193_A0193M-04A Revision
May 10, 2003 A0193_A0193M-03 Revision
Oct. 10, 2001 A0193_A0193M-01B Revision
Oct. 10, 2001 A0193_A0193M-01A Revision
Oct. 10, 2001 A0193_A0193M-01 Revision
Oct. 10, 2001 A0193_A0193M-00B Revision
Oct. 10, 2001 A0193_A0193M-00A Revision
Not Available A0193_A0193M-98A Revision