Logo

ASTM A1018/A1018M-05b

Historical Revision

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers hot-rolled, heavy-thickness coils beyond the size limits of Specification A 1011/A 1011M.

1.2 The product is available in five designations: Commercial Steel, Drawing Steel, Structural Steel, High-Strength Low-Alloy Steel, and High-Strength Low-Alloy Steel with Improved Formability.

1.3 This material is available only in coils described as follows:

ProductSize Limits, Coils Only
Width, in. [mm]Thickness, in. [mm]
StripOver 8 to 12, incl[Over 200 to 300]0.230 to 1.000, incl[Over 6.0 to 25]
SheetOver 12 to 48, incl[Over 300 to 1200]0.230 to 1.000, incl[Over 6.0 to 25]
SheetOver 48[Over 1200]0.180 to 1.000, incl[Over 4.5 to 25]

1.4 Sheet and strip in coils of sizes noted in 1.3 are covered by this specification only with the following provisions:

1.4.1 The material is to be fed directly from coils into a blanking press, drawing or forming operation, tube mill, rolling mill, or sheared or slit into blanks for subsequent drawing or forming.

1.4.2 The material is not to be converted into steel plates for structural or pressure vessel use unless tested in complete accordance with the appropriate sections of Specifications A 6/A 6M (plates provided from coils) or A 20/A 20M (plates produced from coils). Plate converted from coils is no longer governed by this sheet steel specification and since this material is now a plate, the requirements of the appropriate plate specification shall apply, except in cases where there is a conflict between the requirements of the plate specification and this specification. In these cases, the more restrictive limits of either specification shall apply.

1.4.3 The dimensional tolerances of Specification A 635/A 635M are applicable to material produced to this specification.

1.4.4 Not all strength levels are available in all thicknesses. The user should consult the producer for appropriate size limitations.

1.5 The values stated in either inch-pound units or SI units [metric] are to be regarded separately as standard. Within the text the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other.


SDO ASTM: ASTM International
Document Number A1018
Publication Date Dec. 1, 2005
Language en - English
Page Count 7
Revision Level 05b
Supercedes
Committee A01.19
Publish Date Document Id Type View
Nov. 1, 2023 A1018_A1018M-23A Revision
May 1, 2023 A1018_A1018M-23 Revision
May 15, 2018 A1018_A1018M-18 Revision
Sept. 1, 2016 A1018_A1018M-16A Revision
May 1, 2016 A1018_A1018M-16 Revision
Sept. 1, 2015 A1018_A1018M-15 Revision
June 1, 2010 A1018_A1018M-10 Revision
Nov. 1, 2009 A1018_A1018M-09 Revision
Oct. 1, 2008 A1018_A1018M-08A Revision
July 1, 2008 A1018_A1018M-08 Revision
Sept. 1, 2007 A1018_A1018M-07 Revision
Oct. 1, 2006 A1018_A1018M-06C Revision
June 15, 2006 A1018_A1018M-06B Revision
May 1, 2006 A1018_A1018M-06A Revision
March 15, 2006 A1018_A1018M-06 Revision
Dec. 1, 2005 A1018_A1018M-05B Revision
Sept. 15, 2005 A1018_A1018M-05A Revision
May 1, 2005 A1018_A1018M-05 Revision
April 1, 2004 A1018_A1018M-04 Revision
Oct. 1, 2003 A1018_A1018M-03A Revision
April 10, 2003 A1018_A1018M-03 Revision
Dec. 10, 2002 A1018_A1018M-02 Revision
Sept. 10, 2001 A1018_A1018M-01A Revision