Logo

ASTM A1018/A1018M-03a

Historical Revision

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

$83.00

$83.00

$149.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers hot rolled, heavy thickness coils beyond the size limits of specification A1011.

1.2 The product is available in three designations; Structural Steel, and High-Strength Low-Alloy Steel, Columbium or Vanadium, and High-Strength Low-Alloy Steel with Improved Formability.

1.3 This material is available only in coils described as follows:

ProductSize Limits, Coils Only
Width, in [mm]Thickness, in [mm]
Strip Over 8 to 12, incl
[Over 200 to 300]
0.230 to 1.000, incl
[Over 6.0 to 25]
Sheet Over 12 to 48, incl
[Over 300 to 1200]
0.230 to 1.000, incl
[Over 6.0 to 25]
Sheet Over 48
[Over 1200]
0.180 to 1.000, incl
[Over 4.5 to 25]

1.4 Sheet and strip in coils of sizes noted in 1.3 are covered by this specification only with the following provisions:

1.4.1 The material is not to be converted into steel plates for structural or pressure vessel use unless tested in complete accordance with the appropriate sections of Specifications A6/A6M (plates provided from coils) or A20/A20M (plates produced from coils). Plate produced in this manner is no longer governed by this sheet steel specification and since this material is now plate, the appropriate plate standard must now apply.

1.4.2 This specification is not applicable to the steels covered by Specification A635/A635M.

1.4.3 The dimensional tolerances of Specification A635/A635M are applicable to material produced to this specification.

1.4.4 The material is to be fed directly from coils into a blanking press, drawing or forming operation, tube mill, rolling mill, or sheared or slit into blanks for subsequent drawing or forming.

1.4.5 Not all strength levels are available in all thicknesses. The user should consult the producer for appropriate size limitations.

1.5 The values stated in either inch-pound units or SI units [metric] are to be regarded separately as standard. Within the text the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other.


SDO ASTM: ASTM International
Document Number A1018
Publication Date Oct. 1, 2003
Language en - English
Page Count 5
Revision Level 03a
Supercedes
Committee A01.19
Publish Date Document Id Type View
Nov. 1, 2023 A1018_A1018M-23A Revision
May 1, 2023 A1018_A1018M-23 Revision
May 15, 2018 A1018_A1018M-18 Revision
Sept. 1, 2016 A1018_A1018M-16A Revision
May 1, 2016 A1018_A1018M-16 Revision
Sept. 1, 2015 A1018_A1018M-15 Revision
June 1, 2010 A1018_A1018M-10 Revision
Nov. 1, 2009 A1018_A1018M-09 Revision
Oct. 1, 2008 A1018_A1018M-08A Revision
July 1, 2008 A1018_A1018M-08 Revision
Sept. 1, 2007 A1018_A1018M-07 Revision
Oct. 1, 2006 A1018_A1018M-06C Revision
June 15, 2006 A1018_A1018M-06B Revision
May 1, 2006 A1018_A1018M-06A Revision
March 15, 2006 A1018_A1018M-06 Revision
Dec. 1, 2005 A1018_A1018M-05B Revision
Sept. 15, 2005 A1018_A1018M-05A Revision
May 1, 2005 A1018_A1018M-05 Revision
April 1, 2004 A1018_A1018M-04 Revision
Oct. 1, 2003 A1018_A1018M-03A Revision
April 10, 2003 A1018_A1018M-03 Revision
Dec. 10, 2002 A1018_A1018M-02 Revision
Sept. 10, 2001 A1018_A1018M-01A Revision