Logo

ASTM A1016/A1016M-04

Historical Revision

Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

$91.00

$91.00

$163.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.

Title of SpecificationASTM Designation
Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes A 209/A 209M
Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger TubesA 213/A 213M
Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser TubesA 249/A 249M
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater TubesA 250/A 250M
Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General ServiceA 268/A 268M
Seamless and Welded Austenitic Stainless Steel Tubing for General Service A 269
Seamless and Welded Austenitic Stainless Steel Sanitary TubingA 270
Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service A 334/A 334M
Seamless and Electric-Welded Low-Alloy Steel TubesA 423/A 423M
Welded Austenitic Stainless Steel Feedwater Heater TubesA 688/A 688M
Austenitic Stainless Steel Tubing for Breeder Reactor Core Components A 771
Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General ServiceA 789/A 789M
Welded Ferritic Stainless Steel Feedwater Heater TubesA 803/A 803M
Austenitic and Ferritic Stainless Steel Duct Tubes for Breeder Reactor Core ComponentsA 826
High-Frequency Induction Welded, Unannealed Austenitic Steel Condenser Tubes A 851
These designations refer to the latest issue of the respective specifications.

1.2 In the case of conflict between a requirement of a product specification and a requirement of this general requirements specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this general requirements specification and a more stringent requirement of the purchase order, the purchase order shall prevail.

1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each System must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation (SI) of the product specification is specified in the order.


SDO ASTM: ASTM International
Document Number A1016
Publication Date April 1, 2004
Language en - English
Page Count 11
Revision Level 04
Supercedes
Committee A01.10
Publish Date Document Id Type View
Oct. 15, 2024 A1016_A1016M-24A Revision
May 1, 2024 A1016_A1016M-24 Revision
Nov. 1, 2023 A1016_A1016M-23 Revision
Sept. 1, 2018 A1016_A1016M-18A Revision
March 1, 2018 A1016_A1016M-18 Revision
Sept. 1, 2017 A1016_A1016M-17A Revision
March 15, 2017 A1016_A1016M-17 Revision
March 1, 2014 A1016_A1016M-14E01 Revision
March 1, 2014 A1016_A1016M-14 Revision
April 1, 2013 A1016_A1016M-13 Revision
May 15, 2011 A1016_A1016M-11A Revision
April 1, 2011 A1016_A1016M-11 Revision
Oct. 1, 2010 A1016_A1016M-10 Revision
Oct. 1, 2008 A1016_A1016M-08 Revision
July 1, 2004 A1016_A1016M-04A Revision
April 1, 2004 A1016_A1016M-04 Revision
June 10, 2002 A1016_A1016M-02A Revision
Jan. 10, 2002 A1016_A1016M-02 Revision
Jan. 10, 2002 A1016_A1016M-01A Revision
Jan. 10, 2002 A1016_A1016M-01 Revision