Logo

ASTM A1014/A1014M-06

Historical Revision

Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

$73.00

$73.00

$131.40


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers a precipitation hardening bolting material (UNS N07718) for high temperature service.

1.2 This specification is expressed in both inch-pound and in SI units. However, unless the order specifies the applicable "M" designation (SI units), the material shall be furnished to inch-pound units.

1.3 The values stated in either inch-pounds or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.


This specification covers a precipitation hardening bolting material (UNS N07718) for high temperature service. The alloy shall be multiple melted using consumable electrode practice in the remelt cycle or shall be induction melted under vacuum. Requirements for solution treatment, precipitation heat treatment, straightening, and thread forming by rolling are detailed. Remelt ingots shall conform to the chemical composition requirements (as to chemical and product analyses) prescribed for the following elements: carbon, manganese, silicon, phosphorus, sulfur, chromium, cobalt, molybdenum, columbium, titanium, aluminum, boron, iron, copper, and nickel. Tensile, hardness, and stress rupture tests shall be performed and test specimen shall meet the requirements specified for tensile strength, yield strength, elongation, Brinell hardness, and stress rupture. The method of determining the minimum full size breaking strength for headed fastener is given. Metallography shall be taken for microstructure and macrostructure properties including grain size and flow lines.


SDO ASTM: ASTM International
Document Number A1014
Publication Date March 1, 2006
Language en - English
Page Count 3
Revision Level 06
Supercedes
Committee A01.22
Publish Date Document Id Type View
May 1, 2016 A1014_A1014M-16E01 Revision
May 1, 2016 A1014_A1014M-16 Revision
Nov. 1, 2015 A1014_A1014M-15 Revision
May 15, 2010 A1014_A1014M-10 Revision
May 1, 2009 A1014_A1014M-09 Revision
March 1, 2006 A1014_A1014M-06 Revision
Sept. 1, 2021 A1014_A1014M-16R21 Reaffirmation