Logo

ASTM A1011/A1011M-23

Current Revision

Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

$69.00

$69.00

$124.20

$83.00

$83.00

$149.40



Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Stay effortlessly up-to-date with the latest standard revisions. When new versions are released, they're automatically charged and delivered to you, ensuring seamless compliance.

...

1.1 This specification covers hot-rolled, carbon, structural, high-strength low-alloy, high-strength low-alloy with improved formability, and ultra-high strength steel sheet and strip, in coils and cut lengths.

1.2 Hot rolled steel sheet and strip is available in the designations as listed in 4.1.

1.3 This specification is not applicable to the steel covered by Specification A635/A635M.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


This specification covers hot-rolled, carbon, structural, high-strength low-alloy, high-strength low-alloy with improved formability, and ultra-high strength steel sheet and strip, in coils and cut lengths. The steels covered here are: Commercial Steels of types A, B, C, and D; Drawing Steels of types A and B; Structural Steels of grades 30 [205], 33 [230], 36 [250] (with Types 1 and 2), 40 [275], 45 [310], 50 [340], 55 [380], 60 [410], 70 [480], and 80 [550]; High-strength Low-alloy Steel of classes 1 and 2 in grades 45 [310], 50 [340], 55 [380], 60 [410], 65 [450], and 70 [480]; High-strength Low-alloy steels with improved formability in grades 50 [340], 60 [410], 70 [480], and 80 [550]; and Ultra-high Strength Steels of types 1 and 2 in grades 90 [620] and 100 [690]. Heat and product analyses shall be performed wherein specimens shall conform to required chemical composition of carbon, manganese, phosphorus, sulfur, aluminum, silicon, copper, nickel, chromium, molybdenum, vanadium, niobium, titanium, nitrogen, and boron. Except for Commercial and Drawing steels, all other steels shall undergo two tension tests, and shall conform to the following mechanical requirements: yield strength, tensile strength, and elongation. All steels shall undergo bending tests.


SDO ASTM: ASTM International
Document Number A1011
Publication Date May 1, 2023
Language en - English
Page Count 8
Revision Level 23
Supercedes
Committee A01.19
Publish Date Document Id Type View
May 1, 2023 A1011_A1011M-23 Revision
Sept. 1, 2018 A1011_A1011M-18A Revision
June 1, 2018 A1011_A1011M-18 Revision
Nov. 1, 2017 A1011_A1011M-17A Revision
May 1, 2017 A1011_A1011M-17 Revision
Dec. 1, 2015 A1011_A1011M-15 Revision
March 1, 2014 A1011_A1011M-14 Revision
Oct. 1, 2013 A1011_A1011M-13 Revision
Nov. 1, 2012 A1011_A1011M-12B Revision
Aug. 15, 2012 A1011_A1011M-12A Revision
March 1, 2012 A1011_A1011M-12 Revision
April 1, 2010 A1011_A1011M-10 Revision
Nov. 1, 2009 A1011_A1011M-09B Revision
May 1, 2009 A1011_A1011M-09A Revision
April 1, 2009 A1011_A1011M-09 Revision
July 1, 2008 A1011_A1011M-08 Revision
Sept. 1, 2007 A1011_A1011M-07 Revision
Oct. 1, 2006 A1011_A1011M-06B Revision
Sept. 1, 2006 A1011_A1011M-06A Revision
June 15, 2006 A1011_A1011M-06 Revision
Dec. 1, 2005 A1011_A1011M-05A Revision
May 1, 2005 A1011_A1011M-05 Revision
July 1, 2004 A1011_A1011M-04A Revision
April 1, 2004 A1011_A1011M-04 Revision
Oct. 1, 2003 A1011_A1011M-03A Revision
April 10, 2003 A1011_A1011M-03 Revision
March 10, 2002 A1011_A1011M-02 Revision
March 10, 2002 A1011_A1011M-01E01 Revision
March 10, 2002 A1011_A1011M-01A Revision
March 10, 2002 A1011_A1011M-00 Revision